Paul Steinmann

2025

• Ahmadi M., McBride A., Steinmann P., Saxena P.:
  Plane stress finite element modelling of arbitrary compressible hyperelastic materials
  In: Acta Mechanica (2025), Article No.: 114756
  ISSN: 0001-5970
  DOI: 10.1007/s00707-025-04310-z
• Burkhardt C., Soldner D., Steinmann P., Mergheim J.:
  Macroscopic Modeling, Simulation, and Optimization
  DOI: 10.1007/978-3-031-78350-0_14
• Flaschel M., Steinmann P., De Lorenzis L., Kuhl E.:
  Convex neural networks learn generalized standard material models
  In: Journal of the Mechanics and Physics of Solids 200 (2025), Article No.: 106103
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2025.106103
• Friedlein J., Lüder S., Kalich J., Schmale HC., Böhnke M., Schlichter M., Bobbert M., Meschut G., Steinmann P., Mergheim J.:
  Application of stress-state-dependent ductile damage and failure model to clinch joining for a wide range of tool and material combinations
  In: Journal of Advanced Joining Processes 11 (2025), Article No.: 100299
  ISSN: 2666-3309
  DOI: 10.1016/j.jajp.2025.100299
• Friedlein J., Mergheim J., Steinmann P.:
  Modelling of stress-state-dependent ductile damage with gradient-enhancement exemplified for clinch joining
  In: Journal of the Mechanics and Physics of Solids 196 (2025), Article No.: 106026
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2025.106026
• Javili A., Ekiz E., Steinmann P.:
  A Geometrically Nonlinear Correspondence Model for Continuum-Kinematics-Inspired Peridynamics
  In: Journal of Peridynamics and Nonlocal Modeling 7 (2025), Article No.: 6
  ISSN: 2522-896X
  DOI: 10.1007/s42102-025-00129-3
• Javili A., Larsson F., Runesson K., Steinmann P.:
  On a canonical interface model with application to micro-heterogeneous elastic solids
  In: Computer Methods in Applied Mechanics and Engineering 440 (2025), Article No.: 117925
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2025.117925
• Lapina T., Xiang Y., Yao Q., Chen D., Li J., Steinmann P., Rudykh S.:
  Microstructural buckling in soft visco-hyperelastic laminates
  In: International Journal of Solids and Structures 311 (2025), Article No.: 113242
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2025.113242
• Neumann O., Surana HV., Melly SK., Steinmann P., Budday S.:
  Mechanical characteristics of spinal cord tissue by indentation
  In: Journal of the Mechanical Behavior of Biomedical Materials 163 (2025), Article No.: 106863
  ISSN: 1751-6161
  DOI: 10.1016/j.jmbbm.2024.106863
• Pallares J., Fabregat A., Lavrinenko A., Marques N., Santos B., Mosca G., Vega PO., Ravnik J., Vovk N., Fraga B., Monka A., Martínez M., Mestre-Curto N., Souza FJd., Fontes D., Jüngling N., Niessner J., Castilla R., García-Vílchez M., Fletcher DF., Inthavong K., Hriberšek M., Steinmann P., Wedel J., Duchaine F., Sankurantripati S., Amari L., Janiga G., Marchioli C., Cito S.:
  Computational fluid dynamics challenge on indoor dispersion of pathogen-laden aerosols
  In: Physics of Fluids 37 (2025), Article No.: 025226
  ISSN: 1070-6631
  DOI: 10.1063/5.0252665
• Papastavrou A., Pivonka P., Schmidt I., Steinmann P.:
  A cellular-meso-macro three-scale approach captures remodelling of cancellous bone in health and disease
  In: Biomechanics and Modeling in Mechanobiology (2025), Article No.: 116125
  ISSN: 1617-7959
  DOI: 10.1007/s10237-025-01948-5
• Schaller E., Javili A., Steinmann P.:
  A novel energy-fitted hexagonal quadrature scheme enables low-cost and high-fidelity peridynamic computations
  In: Computer Methods in Applied Mechanics and Engineering 440 (2025), Article No.: 117918
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2025.117918
• Wedel J., Hriberšek M., Ravnik J., Steinmann P.:
  Ellipsoidal soft micro-particles suspended in dilute viscous flow
  In: Computer Methods in Applied Mechanics and Engineering 441 (2025), Article No.: 117973
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2025.117973
• Wedel J., Steinmann P., Prinz F., Lízal F., Hriberšek M., Ravnik J.:
  Mass distribution impacts on particle translation and orientation dynamics in dilute flows
  In: Powder Technology 452 (2025), Article No.: 120424
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2024.120424
• Xiao R., Chen Z., Shi Y., Zhan L., Qu S., Steinmann P.:
  A continuum model for novel electromechanical-instability-free dielectric elastomers
  In: Journal of the Mechanics and Physics of Solids 196 (2025), Article No.: 105994
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2024.105994
• van Huyssteen D., Rivarola FL., Etse G., Steinmann P.:
  On mesh refinement procedures for polygonal virtual elements
  In: Applications in Engineering Science 22 (2025), Article No.: 100222
  ISSN: 2666-4968
  DOI: 10.1016/j.apples.2025.100222
• van Huyssteen D., Rivarola FL., Etse G., Steinmann P.:
  Quasi-optimal mesh generation for the virtual element method: A fully adaptive remeshing procedure
  In: Computer Methods in Applied Mechanics and Engineering 435 (2025), Article No.: 117630
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2024.117630

2024

• Chacón G., Rivarola FL., van Huyssteen D., Steinmann P., Etse G.:
  An efficient procedure for concrete fracture analysis based on mesh refinement ergodicity
  In: Computational Mechanics (2024)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-024-02509-w
• Firooz S., Reddy BD., Zaburdaev V., Steinmann P.:
  Mean zero artificial diffusion for stable finite element approximation of convection in cellular aggregate formation
  In: Computer Methods in Applied Mechanics and Engineering 419 (2024), p. 116649
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2023.116649
• Friedlein J., Böhnke M., Schlichter M., Bobbert M., Meschut G., Mergheim J., Steinmann P.:
  Material Parameter Identification for a Stress-State-Dependent Ductile Damage and Failure Model Applied to Clinch Joining
  In: Journal of Manufacturing and Materials Processing 8 (2024), Article No.: 157
  ISSN: 2504-4494
  DOI: 10.3390/jmmp8040157
• Greiner A., Reiter N., Hinrichsen J., Kainz MP., Sommer G., Holzapfel GA., Steinmann P., Comellas E., Budday S.:
  Model-driven exploration of poro-viscoelasticity in human brain tissue: be careful with the parameters!
  In: Interface Focus 14 (2024)
  ISSN: 2042-8901
  DOI: 10.1098/rsfs.2024.0026
• Laurien M., Javili A., Steinmann P.:
  Nonlocal interfaces accounting for progressive damage within continuum-kinematics-inspired peridynamics
  In: International Journal of Solids and Structures 290 (2024), p. 1-21
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2023.112641
• Laurien M., Javili A., Steinmann P.:
  Nonlocal interfaces accounting for progressive damage within continuum-kinematics-inspired peridynamics
  In: International Journal of Solids and Structures 290 (2024), Article No.: 112641
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2023.112641
• Liu Z., McBride A., Ghosh A., Heltai L., Huang W., Yu T., Steinmann P., Saxena P.:
  Computational instability analysis of inflated hyperelastic thin shells using subdivision surfaces
  In: Computational Mechanics 73 (2024), p. 257-276
  ISSN: 0178-7675
  DOI: 10.1007/s00466-023-02366-z
• Mehnert M., Moreno Mateos MA., Griwatz JH., Müsse S., Wegner HA., Steinmann P.:
  Experimental and numerical investigation of the photo-mechanical response of azobenzene filled soft elastomers, Part I: Experimental investigations
  In: Extreme Mechanics Letters (2024), p. 102182
  ISSN: 2352-4316
  DOI: 10.1016/j.eml.2024.102182
• Moreno Mateos MA., Mehnert M., Steinmann P.:
  Electro-mechanical actuation modulates fracture performance of soft dielectric elastomers
  In: International Journal of Engineering Science 195 (2024), Article No.: 104008
  ISSN: 0020-7225
  DOI: 10.1016/j.ijengsci.2023.104008
• Moreno Mateos MA., Steinmann P.:
  Configurational force method enables fracture assessment in soft materials
  In: Journal of the Mechanics and Physics of Solids 186 (2024), p. 105602
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2024.105602
• Moreno Mateos MA., Steinmann P.:
  Crosslinking degree variations enable programming and controlling soft fracture via sideways cracking
  In: npj Computational Materials 10 (2024), Article No.: 282
  ISSN: 2057-3960
  DOI: 10.1038/s41524-024-01489-y
• Richter E., Possart G., Steinmann P., Pfaller S., Ries M.:
  Revealing the percolation–agglomeration transition in polymer nanocomposites via MD-informed continuum RVEs with elastoplastic interphases
  In: Composites Part B-Engineering 281 (2024), Article No.: 111477
  ISSN: 1359-8368
  DOI: 10.1016/j.compositesb.2024.111477
• Ries M., Laubert L., Steinmann P., Pfaller S.:
  Impact of the unimodal molar mass distribution on the mechanical behavior of polymer nanocomposites below the glass transition temperature: A generic, coarse-grained molecular dynamics study
  In: European Journal of Mechanics A-Solids 107 (2024), Article No.: 105379
  ISSN: 0997-7538
  DOI: 10.1016/j.euromechsol.2024.105379
• Stankiewicz G., Dev C., Weichelt M., Fey T., Steinmann P.:
  Towards advanced piezoelectric metamaterial design via combined topology and shape optimization
  In: Structural and Multidisciplinary Optimization 67 (2024), Article No.: 26
  ISSN: 1615-147X
  DOI: 10.1007/s00158-024-03742-w
• Steinmann P., Schmidt I., Pivonka P., Papastavrou A.:
  A computational two-scale approach to cancellous bone remodelling
  In: Advanced Modeling and Simulation in Engineering Sciences 11 (2024), Article No.: 13
  ISSN: 2213-7467
  DOI: 10.1186/s40323-024-00267-1
• Weber F., Steinmann P., Pfaller S., Ries M., Dötschel V.:
  Evaluating the impact of filler size and filler content on the stiffness, strength, and toughness of polymer nanocomposites using coarse-grained molecular dynamics
  In: Engineering Fracture Mechanics 307 (2024), Article No.: 110270
  ISSN: 0013-7944
  DOI: 10.1016/j.engfracmech.2024.110270
• Wedel J., Hriberšek M., Ravnik J., Steinmann P.:
  A novel pseudo-rigid body approach to the non-linear dynamics of soft micro-particles in dilute viscous flow
  In: Journal of Computational Physics 519 (2024), Article No.: 113377
  ISSN: 0021-9991
  DOI: 10.1016/j.jcp.2024.113377
• Wedel J., Hriberšek M., Steinmann P., Ravnik J.:
  Coefficient of tangential restitution for non-spherical particles
  In: Powder Technology 437 (2024), Article No.: 119526
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2024.119526
• Wiesheier S., Moreno Mateos MA., Steinmann P.:
  Versatile data-adaptive hyperelastic energy functions for soft materials
  In: Computer Methods in Applied Mechanics and Engineering 430 (2024), p. 117208
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2024.117208
• Zhao W., Jain Y., Müller-Plathe F., Steinmann P., Pfaller S.:
  Investigating fracture mechanisms in glassy polymers using coupled particle-continuum simulations
  In: Journal of the Mechanics and Physics of Solids 193 (2024), Article No.: 105884
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2024.105884
• Zhao W., Steinmann P., Pfaller S.:
  Modeling steady state rate- and temperature-dependent strain hardening behavior of glassy polymers
  In: Mechanics of Materials 195 (2024), Article No.: 105044
  ISSN: 0167-6636
  DOI: 10.1016/j.mechmat.2024.105044
• Zhao W., Xiao R., Steinmann P., Pfaller S.:
  Time–temperature correlations of amorphous thermoplastics at large strains based on molecular dynamics simulations
  In: Mechanics of Materials 190 (2024), p. 104926
  ISSN: 0167-6636
  DOI: 10.1016/j.mechmat.2024.104926
• van Huyssteen D., Rivarola FL., Etse G., Steinmann P.:
  On adaptive mesh coarsening procedures for the virtual element method for two-dimensional elastic problems
  In: Computer Methods in Applied Mechanics and Engineering 418 (2024), Article No.: 116507
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2023.116507

2023

• Bielak CR., Böhnke M., Friedlein J., Bobbert M., Mergheim J., Steinmann P., Meschut G.:
  Numerical analysis of failure modeling in clinching process chain simulation
  20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, April 2, 2023 - April 5, 2023)
  In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (ed.): Materials Research Proceedings 2023
  DOI: 10.21741/9781644902417-33
• Böhnke M., Bielak CR., Friedlein J., Bobbert M., Mergheim J., Meschut G., Steinmann P.:
  A calibration method for failure modeling in clinching process simulations
  20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, April 2, 2023 - April 5, 2023)
  In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (ed.): Materials Research Proceedings 2023
  DOI: 10.21741/9781644902417-34
• Dev C., Stankiewicz G., Steinmann P.:
  On the influence of free space in topology optimization of electro-active polymers
  In: Structural and Multidisciplinary Optimization 66 (2023), Article No.: 187
  ISSN: 1615-147X
  DOI: 10.1007/s00158-023-03634-5
• Firooz S., Javili A., Steinmann P.:
  A versatile implicit computational framework for continuum-kinematics-inspired peridynamics
  In: Computational Mechanics (2023)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-023-02415-7
• Flaschel M., Yu H., Reiter N., Hinrichsen J., Budday S., Steinmann P., Kumar S., De Lorenzis L.:
  Automated discovery of interpretable hyperelastic material models for human brain tissue with EUCLID
  In: Journal of the Mechanics and Physics of Solids 180 (2023), Article No.: 105404
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2023.105404
• Friedlein J., Bielak C., Böhnke M., Bobbert M., Meschut G., Mergheim J., Steinmann P.:
  Influence of plastic orthotropy on clinching of sheet metal
  20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, April 2, 2023 - April 5, 2023)
  In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (ed.): Materials Research Proceedings 2023
  DOI: 10.21741/9781644902417-17
• Friedlein J., Mergheim J., Steinmann P.:
  Efficient gradient enhancements for plasticity with ductile damage in the logarithmic strain space
  In: European Journal of Mechanics A-Solids 99 (2023), Article No.: 104946
  ISSN: 0997-7538
  DOI: 10.1016/j.euromechsol.2023.104946
• Hegendörfer A., Steinmann P., Mergheim J.:
  An implicitly coupled finite element-electronic circuit simulator method for efficient system simulations of piezoelectric energy harvesters
  In: Journal of Intelligent Material Systems and Structures (2023)
  ISSN: 1045-389X
  DOI: 10.1177/1045389X231157359
• Hegendörfer A., Steinmann P., Mergheim J.:
  Numerical Optimization of a Nonlinear Nonideal Piezoelectric Energy Harvester Using Deep Learning
  In: Journal of Low Power Electronics and Applications 13 (2023), Article No.: 8
  ISSN: 2079-9268
  DOI: 10.3390/jlpea13010008
• Hübner D., Herrnböck L., Wein F., Mergheim J., Steinmann P., Stingl M.:
  Buckling optimization of additively manufactured cellular structures using numerical homogenization based on beam models
  In: Archive of Applied Mechanics (2023)
  ISSN: 0939-1533
  DOI: 10.1007/s00419-023-02503-3
• Kainz MP., Greiner A., Hinrichsen J., Kolb D., Comellas E., Steinmann P., Budday S., Terzano M., Holzapfel GA.:
  Poro-viscoelastic material parameter identification of brain tissue-mimicking hydrogels
  In: Frontiers in Bioengineering and Biotechnology 11 (2023), Article No.: 1143304
  ISSN: 2296-4185
  DOI: 10.3389/fbioe.2023.1143304
• Lara Hernandez JA., Steinmann P.:
  A numerical study on the visco-plastic regularization of a rate-independent strain gradient crystal plasticity formulation
  In: Computational Mechanics (2023)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-023-02420-w
• Laurien M., Javili A., Steinmann P.:
  Peridynamic modeling of nonlocal degrading interfaces in composites
  In: Forces in Mechanics 10 (2023)
  ISSN: 2666-3597
  DOI: 10.1016/j.finmec.2022.100124
• Lewandowski K., Barbera D., Blackwell P., Roohi AH., Athanasiadis I., McBride A., Steinmann P., Pearce C., Kaczmarczyk Ł.:
  Multifield finite strain plasticity: Theory and numerics
  In: Computer Methods in Applied Mechanics and Engineering 414 (2023), Article No.: 116101
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2023.116101
• Mergheim J., Breuning C., Burkhardt C., Hübner D., Köpf J., Herrnböck L., Yang Z., Körner C., Markl M., Steinmann P., Stingl M.:
  Additive manufacturing of cellular structures: Multiscale simulation and optimization
  In: Journal of Manufacturing Processes 95 (2023), p. 275-290
  ISSN: 1526-6125
  DOI: 10.1016/j.jmapro.2023.03.071
• Moreno Mateos MA., Hossain M., Steinmann P., Garcia-Gonzalez D.:
  Hard magnetics in ultra-soft magnetorheological elastomers enhance fracture toughness and delay crack propagation
  In: Journal of the Mechanics and Physics of Solids 173 (2023), Article No.: 105232
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2023.105232
• Nahr F., Rasch M., Burkhardt C., Renner J., Baumgärtner B., Hausotte T., Körner C., Steinmann P., Mergheim J., Schmidt M., Markl M.:
  Geometrical Influence on Material Properties for Ti6Al4V Parts in Powder Bed Fusion
  In: Journal of Manufacturing and Materials Processing 7 (2023), p. 82
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7030082
• Okada T., Isobe M., Kosaka T., Steinmann P., Matsumori H., Matsui N.:
  Study on Electric Motor Vibration Suppression by Active Dynamic Vibration Absorber
  2023 IEEE International Electric Machines and Drives Conference, IEMDC 2023 (San Francisco, CA, USA, May 15, 2023 - May 18, 2023)
  In: 2023 IEEE International Electric Machines and Drives Conference, IEMDC 2023 2023
  DOI: 10.1109/IEMDC55163.2023.10238866
• Pranavi D., Steinmann P., Rajagopal A.:
  A unifying finite strain modeling framework for anisotropic mixed-mode fracture in soft materials
  In: Computational Mechanics (2023)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-023-02359-y
• Ries M., Bauer C., Weber F., Steinmann P., Pfaller S.:
  Characterization of the material behavior and identification of effective elastic moduli based on molecular dynamics simulations of coarse-grained silica
  In: Mathematics and Mechanics of Solids 28 (2023)
  ISSN: 1081-2865
  DOI: 10.1177/10812865221108099
• Ries M., Reber S., Steinmann P., Pfaller S.:
  Extending a generic and fast coarse-grained molecular dynamics model to examine the mechanical behavior of grafted polymer nanocomposites
  In: Forces in Mechanics 12 (2023), Article No.: 100207
  ISSN: 2666-3597
  DOI: 10.1016/j.finmec.2023.100207
• Spannraft L., Steinmann P., Mergheim J.:
  A generalized anisotropic damage interface model for finite strains
  In: Journal of the Mechanics and Physics of Solids 174 (2023), Article No.: 105255
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2023.105255
• Titlbach A., Papastavrou A., McBride A., Steinmann P.:
  A novel micromorphic approach captures non-locality in continuum bone remodelling
  In: Computer Methods in Biomechanics and Biomedical Engineering (2023)
  ISSN: 1025-5842
  DOI: 10.1080/10255842.2023.2223331
• Wedel J., Steinmann P., Štrakl M., Hriberšek M., Ravnik J.:
  Shape matters: Lagrangian tracking of complex nonspherical microparticles in superellipsoidal approximation
  In: International Journal of Multiphase Flow 158 (2023), Article No.: 104283
  ISSN: 0301-9322
  DOI: 10.1016/j.ijmultiphaseflow.2022.104283
• Wedel J., Štrakl M., Hriberšek M., Steinmann P., Ravnik J.:
  A novel particle–particle and particle–wall collision model for superellipsoidal particles
  In: Computational Particle Mechanics (2023)
  ISSN: 2196-4378
  DOI: 10.1007/s40571-023-00618-6
• Wiesheier S., Mergheim J., Steinmann P.:
  Discrete data-adaptive approximation of hyperelastic energy functions
  In: Computer Methods in Applied Mechanics and Engineering 416 (2023), Article No.: 116366
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2023.116366
• Zarzor MS., Steinmann P., Budday S.:
  Multifield computational model for human brain development: Explicit numerical stabilization
  In: Proceedings in Applied Mathematics and Mechanics (2023)
  ISSN: 1617-7061
  DOI: 10.1002/pamm.202300288
• Zhan L., Wang S., Qu S., Steinmann P., Xiao R.:
  A general continuum damage model for soft composites
  In: Journal of the Mechanics and Physics of Solids 175 (2023), Article No.: 105290
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2023.105290
• Zhan L., Wang S., Qu S., Steinmann P., Xiao R.:
  A new micro–macro transition for hyperelastic materials
  In: Journal of the Mechanics and Physics of Solids 171 (2023), Article No.: 105156
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2022.105156

2022

• Burkhardt C., Steinmann P., Mergheim J.:
  Thermo-mechanical simulations of powder bed fusion processes: accuracy and efficiency
  In: Advanced Modeling and Simulation in Engineering Sciences 9 (2022), Article No.: 18
  ISSN: 2213-7467
  DOI: 10.1186/s40323-022-00230-y
• Caspari M., Schwarz M., Steinmann P.:
  Node Based Non-invasive Form Finding Revisited-The Challenge of Remeshing
  Springer International Publishing, 2022
  ISBN: 9783030873127
  DOI: 10.1007/978-3-030-87312-7_9
• De Klerk DN., Shire T., Gao Z., McBride AT., Pearce CJ., Steinmann P.:
  A variational integrator for the Discrete Element Method
  In: Journal of Computational Physics 462 (2022), Article No.: 111253
  ISSN: 0021-9991
  DOI: 10.1016/j.jcp.2022.111253
• Dev C., Stankiewicz G., Steinmann P.:
  Sequential topology and shape optimization framework to design compliant mechanisms with boundary stress constraints
  In: Structural and Multidisciplinary Optimization 65 (2022)
  ISSN: 1615-147X
  DOI: 10.1007/s00158-022-03271-4
• Ekiz E., Steinmann P., Javili A.:
  Relationships between the material parameters of continuum-kinematics-inspired peridynamics and isotropic linear elasticity for two-dimensional problems
  In: International Journal of Solids and Structures 238 (2022), Article No.: 111366
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2021.111366
• Firooz S., Chatzigeorgiou G., Steinmann P., Javili A.:
  Extended general interfaces: Mori–Tanaka homogenization and average fields
  In: International Journal of Solids and Structures 254-255 (2022), Article No.: 111933
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2022.111933
• Firooz S., Kaessmair S., Zaburdaev V., Javili A., Steinmann P.:
  On continuum modeling of cell aggregation phenomena
  In: Journal of the Mechanics and Physics of Solids 167 (2022), Article No.: 105004
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2022.105004
• Friedlein J., Mergheim J., Steinmann P.:
  Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HCT590X Sheet Metal
  12th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET 2022 (Toronto, ON, CAN, July 10, 2022 - July 14, 2022)
  In: Kaan Inal, Michael Worswick, Cliff Butcher, Julie Levesque (ed.): Minerals, Metals and Materials Series 2022
  DOI: 10.1007/978-3-031-06212-4_31
• Friedlein J., Mergheim J., Steinmann P.:
  Observations on additive plasticity in the logarithmic strain space at excessive strains
  In: International Journal of Solids and Structures 239 (2022)
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2021.111416
• Hegendörfer A., Steinmann P., Mergheim J.:
  Investigation of a nonlinear piezoelectric energy harvester with advanced electric circuits with the finite element method
  In: SN Applied Sciences 4 (2022), Article No.: 120
  ISSN: 2523-3963
  DOI: 10.1007/s42452-022-05003-1
• Herrnböck L., Kumar A., Steinmann P.:
  Two-scale off-and online approaches to geometrically exact elastoplastic rods
  In: Computational Mechanics (2022)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-022-02204-8
• Hu R., Liu Y., Ravnik J., Hriberšek M., Steinmann P., Cui Y.:
  A hybrid analytical–numerical model for calculating the maximum elastic force acting on a flow-driven elastic prolate spheroidal particle during its collision with a rigid wall
  In: Computational Mechanics (2022)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-021-02127-w
• Kumar P., Phansalkar D., Mergheim J., Leyendecker S., Steinmann P.:
  Computational Fracture Modeling in Heterogeneous Materials - Recent Advances and Future Challenges
  conference, WCCM-APCOM 15th World Congress on Computational Mechanics & 8th Asian Pacific Congress on Computational Mechanics (Yokohama (online), July 31, 2022 - August 5, 2022)
• Kumar P., Steinmann P., Mergheim J.:
  A graded interphase enhanced phase-field approach for modeling fracture in polymer composites
  In: Forces in Mechanics 9 (2022), Article No.: 100135
  ISSN: 2666-3597
  DOI: 10.1016/j.finmec.2022.100135
• Lakshmipathy T., Steinmann P., Bitzek E.:
  LEFM is agnostic to geometrical nonlinearities arising at atomistic crack tips
  In: Forces in Mechanics 9 (2022), p. 100127
  ISSN: 2666-3597
  DOI: 10.1016/j.finmec.2022.100127
• Laurien M., Javili A., Steinmann P.:
  A nonlocal interface approach to peridynamics exemplified by continuum‐kinematics‐inspired peridynamics
  In: International Journal for Numerical Methods in Engineering (2022)
  ISSN: 0029-5981
  DOI: 10.1002/nme.6975
• Laurien M., Javili A., Steinmann P.:
  Peridynamic modeling of nonlocal degrading interfaces in composites
  In: Forces in Mechanics (2022), p. 100124
  ISSN: 2666-3597
  DOI: 10.1016/j.finmec.2022.100124
• Lengger M., Possart G., Steinmann P.:
  A viscoelastic Mooney-Rivlin model for adhesive curing and first steps toward its calibration based on photoelasticity measurements
  In: Archive of Applied Mechanics (2022)
  ISSN: 0939-1533
  DOI: 10.1007/s00419-022-02273-4
• Liu Z., McBride A., Saxena P., Heltai L., Qu Y., Steinmann P.:
  Vibration analysis of piezoelectric Kirchhoff–Love shells based on Catmull–Clark subdivision surfaces
  In: International Journal for Numerical Methods in Engineering (2022)
  ISSN: 0029-5981
  DOI: 10.1002/nme.7010
• Mehnert M., Faber J., Hossain M., Chester SA., Steinmann P.:
  Experimental and numerical investigation of the electro-mechanical response of particle filled elastomers - Part I: Experimental investigations
  In: European Journal of Mechanics A-Solids 96 (2022), Article No.: 104651
  ISSN: 0997-7538
  DOI: 10.1016/j.euromechsol.2022.104651
• Mehnert M., Faber J., Hossain M., Chester SA., Steinmann P.:
  Experimental and numerical investigations of the electro-mechanical response of particle filled elastomers—Part II: Continuum modeling approach
  In: European Journal of Mechanics A-Solids 96 (2022), Article No.: 104661
  ISSN: 0997-7538
  DOI: 10.1016/j.euromechsol.2022.104661
• Mehnert M., Oates W., Steinmann P.:
  Numerical modeling of nonlinear photoelasticity
  In: International Journal for Numerical Methods in Engineering (2022)
  ISSN: 0029-5981
  DOI: 10.1002/nme.7177
• Moreno Mateos MA., Hossain M., Steinmann P., Garcia-Gonzalez D.:
  Hybrid magnetorheological elastomers enable versatile soft actuators
  In: npj Computational Materials 8 (2022), Article No.: 162
  ISSN: 2057-3960
  DOI: 10.1038/s41524-022-00844-1
• Ravnik J., Štrakl M., Wedel J., Steinmann P., Hriberšek M.:
  STOKES FLOW INDUCED DRAG AND TORQUE ON ASBESTOS-LIKE FIBRES CANNOT BE ESTIMATED BY A SIMPLISTIC ELLIPSOIDAL APPROXIMATION
  45th International Conference on Boundary Elements and other Mesh Reduction Methods, BEM/MRM 2022 (Online, May 24, 2022 - May 26, 2022)
  In: Alexander H.-D. Cheng (ed.): WIT Transactions on Engineering Sciences 2022
  DOI: 10.2495/BE450031
• Ries M., Bauer C., Weber F., Steinmann P., Pfaller S.:
  Characterization of the material behavior and identification of effective elastic moduli based on molecular dynamics simulations of coarse-grained silica
  In: Mathematics and Mechanics of Solids (2022)
  ISSN: 1081-2865
  DOI: 10.1177/10812865221108099
• Ries M., Seibert J., Steinmann P., Pfaller S.:
  Applying a generic and fast coarse-grained molecular dynamics model to extensively study the mechanical behavior of polymer nanocomposites
  In: eXPRESS Polymer Letters 16 (2022), p. 1304-1321
  ISSN: 1788-618X
  DOI: 10.3144/expresspolymlett.2022.94
• Ries M., Weber F., Possart G., Steinmann P., Pfaller S.:
  A quantitative interphase model for polymer nanocomposites: Verification, validation, and consequences regarding size effects
  In: Composites Part A-Applied Science and Manufacturing 161 (2022), Article No.: 107094
  ISSN: 1359-835X
  DOI: 10.1016/j.compositesa.2022.107094
• Ritter J., Shegufta S., Steinmann P., Zaiser M.:
  An energetically consistent surface correction method for bond-based peridynamics
  In: Forces in Mechanics 9 (2022), Article No.: 100132
  ISSN: 2666-3597
  DOI: 10.1016/j.finmec.2022.100132
• Schaller E., Javili A., Schmidt I., Papastavrou A., Steinmann P.:
  A peridynamic formulation for nonlocal bone remodelling
  In: Computer Methods in Biomechanics and Biomedical Engineering (2022)
  ISSN: 1025-5842
  DOI: 10.1080/10255842.2022.2039641
• Schaller E., Javili A., Steinmann P.:
  Open system peridynamics
  In: Continuum Mechanics and Thermodynamics (2022)
  ISSN: 0935-1175
  DOI: 10.1007/s00161-022-01105-8
• Schmelzle L., Mergheim J., Possart G., Steinmann P., Striewe M., Meschut G.:
  Experimentelle und numerische Untersuchung des Einflusses variabler Betriebstemperaturen auf das Trag- und Versagensverhalten struktureller Klebverbindungen unter Crashbelastung
  22. Kolloquium: Gemeinsame Forschung in der Klebtechnik (Online-Tagung, February 15, 2022 - February 16, 2022)
  (Conference report)
• Schmelzle L., Striewe M., Mergheim J., Meschut G., Possart G., Teutenberg D., Hein D., Steinmann P.:
  Testing, modelling, and parameter identification for adhesively bonded joints under the influence of temperature
  In: Journal of Adhesion Science and Technology (2022), p. 1-32
  ISSN: 0169-4243
  DOI: 10.1080/01694243.2022.2125714
• Spannraft L., Possart G., Steinmann P., Mergheim J.:
  Generalized interfaces enabling macroscopic modeling of structural adhesives and their failure
  In: Forces in Mechanics 9 (2022), Article No.: 100137
  ISSN: 2666-3597
  DOI: 10.1016/j.finmec.2022.100137
• Stanisauskis E., Mashayekhi S., Pahari B., Mehnert M., Steinmann P., Oates W.:
  Fractional and fractal order effects in soft elastomers: Strain rate and temperature dependent nonlinear mechanics
  In: Mechanics of Materials 172 (2022), Article No.: 104390
  ISSN: 0167-6636
  DOI: 10.1016/j.mechmat.2022.104390
• Stankiewicz G., Dev C., Steinmann P.:
  Geometrically nonlinear design of compliant mechanisms: Topology and shape optimization with stress and curvature constraints
  In: Computer Methods in Applied Mechanics and Engineering 397 (2022)
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2022.115161
• Steinmann P.:
  Consequences of Thermodynamical Balances
  In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, p. 329-359 (Solid Mechanics and its Applications, Vol.272)
  DOI: 10.1007/978-3-030-89070-4_12
• Steinmann P.:
  Kinematical ‘Balances’*
  In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, p. 127-155 (Solid Mechanics and its Applications, Vol.272)
  DOI: 10.1007/978-3-030-89070-4_6
• Steinmann P.:
  Kinematics at Singular Sets
  In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, p. 61-86 (Solid Mechanics and its Applications, Vol.272)
  DOI: 10.1007/978-3-030-89070-4_4
• Steinmann P.:
  Kinematics in Bulk Volumes
  In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, p. 19-36 (Solid Mechanics and its Applications, Vol.272)
  DOI: 10.1007/978-3-030-89070-4_2
• Steinmann P.:
  Kinematics on Dimensionally Reduced Smooth Manifolds
  In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, p. 37-60 (Solid Mechanics and its Applications, Vol.272)
  DOI: 10.1007/978-3-030-89070-4_3
• Steinmann P.:
  Mechanical Balances
  In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, p. 157-188 (Solid Mechanics and its Applications, Vol.272)
  DOI: 10.1007/978-3-030-89070-4_7
• Steinmann P.:
  Variational Setting
  In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, p. 265-297 (Solid Mechanics and its Applications, Vol.272)
  DOI: 10.1007/978-3-030-89070-4_10
• Steinmann P.:
  Virtual Work
  In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, p. 231-263 (Solid Mechanics and its Applications, Vol.272)
  DOI: 10.1007/978-3-030-89070-4_9
• Wakeni MF., Aggarwal A., Kaczmarczyk Ł., McBride AT., Athanasiadis I., Pearce CJ., Steinmann P.:
  A p-adaptive, implicit-explicit mixed finite element method for diffusion-reaction problems
  In: International Journal for Numerical Methods in Engineering (2022)
  ISSN: 0029-5981
  DOI: 10.1002/nme.6967
• Wang J., Fan C., Steinmann P.:
  Modeling the dynamic magneto-mechanical response of magnetic shape memory alloys based on Hamilton's principle: The governing equation system
  In: Journal of the Mechanics and Physics of Solids 160 (2022), Article No.: 104761
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2021.104761
• Wedel J., Steinmann P., Strakl M., Hribersek M., Ravnik J.:
  Correction to: Risk Assessment of Infection by Airborne Droplets and Aerosols at Different Levels of Cardiovascular Activity (Archives of Computational Methods in Engineering, (2021), 28, 6, (4297-4316), 10.1007/s11831-021-09613-7)
  In: Archives of Computational Methods in Engineering 29 (2022), p. 735-
  ISSN: 1134-3060
  DOI: 10.1007/s11831-021-09680-w
• Wedel J., Steinmann P., Štrakl M., Hriberšek M., Cui Y., Ravnik J.:
  Anatomy matters: The role of the subject-specific respiratory tract on aerosol deposition — A CFD study
  In: Computer Methods in Applied Mechanics and Engineering (2022), Article No.: 115372
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2022.115372
• Wedel J., Strakl M., Ravnik J., Steinmann P., Hribersek M.:
  A specific slip length model for the Maxwell slip boundary conditions in the Navier–Stokes solution of flow around a microparticle in the no-slip and slip flow regimes
  In: Theoretical and Computational Fluid Dynamics (2022)
  ISSN: 0935-4964
  DOI: 10.1007/s00162-022-00627-w
• Xiao R., Tian C., Xu Y., Steinmann P.:
  Thermomechanical coupling in glassy polymers: An effective temperature theory
  In: International Journal of Plasticity 156 (2022)
  ISSN: 0749-6419
  DOI: 10.1016/j.ijplas.2022.103361
• van Huyssteen D., Rivarola FL., Etse G., Steinmann P.:
  On mesh refinement procedures for the virtual element method for two-dimensional elastic problems
  In: Computer Methods in Applied Mechanics and Engineering 393 (2022), Article No.: 114849
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2022.114849
• Štrakl M., Hriberšek M., Wedel J., Steinmann P., Ravnik J.:
  A Model for Translation and Rotation Resistance Tensors for Superellipsoidal Particles in Stokes Flow
  In: Journal of Marine Science and Engineering 10 (2022), Article No.: 369
  ISSN: 2077-1312
  DOI: 10.3390/jmse10030369
• Štrakl M., Wedel J., Steinmann P., Hriberšek M., Ravnik J.:
  NUMERICAL DRAG AND LIFT PREDICTION FRAMEWORK FOR SUPERELLIPSOIDAL PARTICLES IN MULTIPHASE FLOWS
  In: International Journal of Computational Methods and Experimental Measurements 10 (2022), p. 38-49
  ISSN: 2046-0546
  DOI: 10.2495/CMEM-V10-N1-38-49

2021

• Birang Oskouei S., Park HS., Smith AS., Steinmann P.:
  Atomistic configurational forces in crystalline fracture
  In: Forces in Mechanics 4 (2021), p. 100044
  ISSN: 2666-3597
  DOI: 10.1016/j.finmec.2021.100044
• Birang Oskouei S., Smith AS., Steinmann P.:
  Configurational Forces in Bond Order Potentials
  In: Proceedings in Applied Mathematics and Mechanics 21 (2021)
  ISSN: 1617-7061
  DOI: 10.1002/pamm.202100160
• Birang Oskouei S., Smith AS., Steinmann P.:
  Phonon-based thermal configurational forces: Definitions and applications in rupture of semiconductors
  In: Engineering Fracture Mechanics 257 (2021), Article No.: 108014
  ISSN: 0013-7944
  DOI: 10.1016/j.engfracmech.2021.108014
• Birang Oskouei S., Steinmann P.:
  Discrete configurational mechanics for the computational study of atomistic fracture mechanics
  In: Forces in Mechanics 2 (2021), p. 100009
  ISSN: 2666-3597
  DOI: 10.1016/j.finmec.2020.100009
• Firooz S., Steinmann P., Javili A.:
  Homogenization of Composites With Extended General Interfaces: Comprehensive Review and Unified Modeling
  In: Applied Mechanics Reviews 73 (2021)
  ISSN: 0003-6900
  DOI: 10.1115/1.4051481
• Floros D., Jobst A., Kergaßner A., Merklein M., Steinmann P.:
  Towards an holistic account on residual stresses in full-forward extruded rods: Experiment, modeling and simulation of forming and operation phases
  In: Archive of Applied Mechanics (2021)
  ISSN: 0939-1533
  DOI: 10.1007/s00419-021-01917-1
• Friedlein J., Mergheim J., Steinmann P.:
  A finite plasticity gradient-damage model for sheet metals during forming and clinching
  19th International Conference on Sheet Metal, SheMet 2021 (Virtual, Online, March 29, 2021 - March 31, 2021)
  In: Key Engineering Materials 2021
  DOI: 10.4028/www.scientific.net/KEM.883.57
• Friedlein J., Wituschek S., Lechner M., Mergheim J., Steinmann P.:
  Inverse parameter identification of an anisotropic plasticity model for sheet metal
  40th International Deep-Drawing Research Group Conference (IDDRG) (, ELECTR NETWORK)
  In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2021), BRISTOL: 2021
  DOI: 10.1088/1757-899X/1157/1/012004
• Greiner A., Reiter N., Paulsen F., Holzapfel GA., Steinmann P., Comellas Sanfeliu E., Budday S.:
  Poro-Viscoelastic Effects During Biomechanical Testing of Human Brain Tissue
  In: Frontiers in Mechanical Engineering 7 (2021), Article No.: 708350
  ISSN: 2297-3079
  DOI: 10.3389/fmech.2021.708350
• Hegendörfer A., Steinmann P., Mergheim J.:
  Nonlinear finite element system simulation of piezoelectric vibration-based energy harvesters
  In: Journal of Intelligent Material Systems and Structures (2021)
  ISSN: 1045-389X
  DOI: 10.1177/1045389X211048222
• Herrnböck L., Kumar A., Steinmann P.:
  Geometrically exact elastoplastic rods: determination of yield surface in terms of stress resultants
  In: Computational Mechanics (2021)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-020-01957-4
• Herrnböck L., Steinmann P.:
  Homogenization of fully nonlinear rod lattice structures: on the size of the RVE and micro structural instabilities
  In: Computational Mechanics (2021)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-021-02123-0
• Javili A., Ekiz E., McBride AT., Steinmann P.:
  Continuum-kinematics-inspired peridynamics: Thermo-mechanical problems
  In: Continuum Mechanics and Thermodynamics (2021)
  ISSN: 0935-1175
  DOI: 10.1007/s00161-021-01000-8
• Javili A., McBride A., Steinmann P.:
  A geometrically exact formulation of peridynamics
  In: Theoretical and Applied Fracture Mechanics 111 (2021), Article No.: 102850
  ISSN: 0167-8442
  DOI: 10.1016/j.tafmec.2020.102850
• Javili A., McBride A., Steinmann P.:
  Kinematically exact peridynamics
  Elsevier, 2021
  ISBN: 9780128200698
  DOI: 10.1016/B978-0-12-820069-8.00016-0
• Jobst A., Floros D., Steinmann P., Merklein M.:
  Component residual stress control in forward rod extrusion by material flow and tribology—experiments and modeling
  In: Forschung Im Ingenieurwesen-Engineering Research (2021)
  ISSN: 0015-7899
  DOI: 10.1007/s10010-021-00509-3
• Kergaßner A., Köpf J., Markl M., Körner C., Mergheim J., Steinmann P.:
  A Novel Approach to Predict the Process-Induced Mechanical Behavior of Additively Manufactured Materials
  In: Journal of Materials Engineering and Performance (2021)
  ISSN: 1059-9495
  DOI: 10.1007/s11665-021-05725-0
• Kumar P., Steinmann P., Mergheim J.:
  Enhanced computational homogenization techniques for modelling size effects in polymer composites
  In: Computational Mechanics (2021)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-021-02037-x
• Käßmair S., Runesson K., Steinmann P., Jänicke R., Larsson F.:
  Variationally consistent computational homogenization of chemomechanical problems with stabilized weakly periodic boundary conditions
  In: International Journal for Numerical Methods in Engineering (2021)
  ISSN: 0029-5981
  DOI: 10.1002/nme.6798
• Laurien M., Javili A., Steinmann P.:
  Nonlocal wrinkling instabilities in bilayered systems using peridynamics
  In: Computational Mechanics (2021)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-021-02057-7
• Lippold D., Kergaßner A., Burkhardt C., Kergaßner M., Loos J., Nistler S., Steinmann P., Budday D., Budday S.:
  Spatiotemporal modeling of first and second wave outbreak dynamics of COVID‐19 in Germany
  In: Biomechanics and Modeling in Mechanobiology (2021)
  ISSN: 1617-7959
  DOI: 10.1007/s10237-021-01520-x
• Liu Z., Mcbride A., Sharma BL., Steinmann P., Saxena P.:
  Coupled electro-elastic deformation and instabilities of a toroidal membrane
  In: Journal of the Mechanics and Physics of Solids 151 (2021)
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2020.104221
• Mehnert M., Hossain M., Steinmann P.:
  A complete thermo-electro-viscoelastic characterization of dielectric elastomers, Part I: Experimental investigations
  In: Journal of the Mechanics and Physics of Solids (2021), p. 104603
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2021.104603
• Mehnert M., Hossain M., Steinmann P.:
  A complete thermo-electro-viscoelastic characterization of dielectric elastomers, Part II: Continuum modeling approach
  In: Journal of the Mechanics and Physics of Solids 157 (2021), p. 104625
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2021.104625
• Mehnert M., Oates W., Steinmann P.:
  A geometrically exact continuum framework for light-matter interaction in photo-active polymers I. Variational setting
  In: International Journal of Solids and Structures 226-227 (2021), Article No.: 111073
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2021.111073
• Pivovarov D., Mergheim J., Willner K., Steinmann P.:
  Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations
  In: Computational Mechanics (2021)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-021-02099-x
• Reddy BD., Steinmann P., Kergaßner A.:
  A thermodynamically consistent theory of stress-gradient plasticity
  In: Journal of the Mechanics and Physics of Solids 147 (2021), p. 104266
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2020.104266
• Ries M., Jain Y., Steinmann P., Pfaller S.:
  Revised Boundary Conditions for FE-MD Multiscale Coupling of Amorphous Polymers
  VIII Conference on Mechanical Response of Composites (Online, September 22, 2021 - September 24, 2021)
  DOI: 10.23967/composites.2021.014
  URL: https://www.scipedia.com/public/Ries_et_al_2021c
• Ries M., Possart G., Steinmann P., Pfaller S.:
  A coupled MD-FE methodology to characterize mechanical interphases in polymeric nanocomposites
  In: International Journal of Mechanical Sciences (2021), p. 106564
  ISSN: 0020-7403
  DOI: 10.1016/j.ijmecsci.2021.106564
• Ries M., Steinmann P., Pfaller S.:
  The Hybrid Capriccio Method: A 1D Study for Further Advancement
  14th World Congress on Computational Mechanics (WCCM) (, January 11, 2021 - January 11, 2021)
  In: F. Chinesta, R. Abgrall, O. Allix, M. Kaliske (ed.): Multiscale and Multiphysics Systems, 2021 2021
  DOI: 10.23967/wccm-eccomas.2020.335
• Ries M., Weber F., Striegel M., Steinmann P., Pfaller S.:
  Multiscale FE-MD Coupling: Influence of the Chain Length on the Mechanical Behavior of Coarse-Grained Polystyrene
  14th World Congress on Computational Mechanics (WCCM) (, January 11, 2021 - January 15, 2021)
  In: F. Chinesta, R. Abgrall, O. Allix and M. Kaliske (ed.): Multiscale and Multiphysics Systems, 2021 2021
  DOI: 10.23967/wccm-eccomas.2020.214
• Saeb S., Firooz S., Steinmann P., Javili A.:
  Generalized interfaces via weighted averages for application to graded interphases at large deformations
  In: Journal of the Mechanics and Physics of Solids (2021), Article No.: 104234
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2020.104234
• Schmidt I., Albert J., Ritthaler M., Papastavrou A., Steinmann P.:
  Bone fracture healing within a continuum bone remodelling framework
  In: Computer Methods in Biomechanics and Biomedical Engineering (2021)
  ISSN: 1025-5842
  DOI: 10.1080/10255842.2021.1998465
• Schmidt I., Papastavrou A., Steinmann P.:
  Concurrent consideration of cortical and cancellous bone within continuum bone remodelling
  In: Computer Methods in Biomechanics and Biomedical Engineering (2021)
  ISSN: 1025-5842
  DOI: 10.1080/10255842.2021.1880573
• Smriti ., Kumar A., Steinmann P.:
  A finite element formulation for a direct approach to elastoplasticity in special Cosserat rods
  In: International Journal for Numerical Methods in Engineering (2021)
  ISSN: 0029-5981
  DOI: 10.1002/nme.6566
• Soldner D., Steinmann P., Mergheim J.:
  Modeling crystallization kinetics for selective laser sintering of polyamide 12
  In: GAMM-Mitteilungen (2021)
  ISSN: 0936-7195
  DOI: 10.1002/gamm.202100011
• Stankiewicz G., Dev C., Steinmann P.:
  Coupled topology and shape optimization using an embedding domain discretization method
  In: Structural and Multidisciplinary Optimization (2021)
  ISSN: 1615-147X
  DOI: 10.1007/s00158-021-03024-9
• Steinmann P., Runesson K.:
  The Catalogue of Computational Material Models: Basic Geometrically Linear Models in 1D
  Springer International Publishing, 2021
  ISBN: 9783030636845
  DOI: 10.1007/978-3-030-63684-5
• Steinmann P., Smith AS., Birang Oskouei S., Birang E., McBride A., Javili A.:
  Atomistic two-, three- and four-body potentials. Spatial and material settings
  In: Journal of the Mechanics and Physics of Solids 154 (2021), Article No.: 104507
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2021.104507
• Wedel J., Steinmann P., Strakl M., Hribersek M., Ravnik J.:
  Can CFD establish a connection to a milder COVID-19 disease in younger people? Aerosol deposition in lungs of different age groups based on Lagrangian particle tracking in turbulent flow
  In: Computational Mechanics (2021)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-021-01988-5
• Wedel J., Steinmann P., Strakl M., Hribersek M., Ravnik J.:
  Risk Assessment of Infection by Airborne Droplets and Aerosols at Different Levels of Cardiovascular Activity
  In: Archives of Computational Methods in Engineering (2021)
  ISSN: 1134-3060
  DOI: 10.1007/s11831-021-09613-7
• Zarzor MS., Käßmair S., Steinmann P., Blümcke I., Budday S.:
  A two-field computational model couples cellular brain development with cortical folding
  In: Brain Multiphysics 2 (2021), p. 100025
  ISSN: 2666-5220
  DOI: 10.1016/j.brain.2021.100025
• Zarzor MS., Käßmair S., Steinmann P., Blümcke I., Budday S.:
  Exploring the interplay between cellular development and mechanics in the developing human brain
  In: Proceedings in Applied Mathematics and Mechanics 21 (2021), Article No.: e202100104
  ISSN: 1617-7061
  DOI: 10.1002/pamm.202100104
• Zhao W., Ries M., Steinmann P., Pfaller S.:
  A viscoelastic-viscoplastic constitutive model for glassy polymers informed by molecular dynamics simulations
  In: International Journal of Solids and Structures (2021), p. 111071
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2021.111071
• Zhao W., Steinmann P., Pfaller S.:
  A particle‐continuum coupling method for multiscale simulations of viscoelastic‐viscoplastic amorphous glassy polymers
  In: International Journal for Numerical Methods in Engineering (2021)
  ISSN: 0029-5981
  DOI: 10.1002/nme.6836

2020

• Budday S., Ovaert T., Holzapfel GA., Steinmann P., Kuhl E.:
  Fifty Shades of Brain: A Review on the Mechanical Testing and Modeling of Brain Tissue
  In: Archives of Computational Methods in Engineering 27 (2020), p. 1187–1230
  ISSN: 1134-3060
  DOI: 10.1007/s11831-019-09352-w
  URL: https://link.springer.com/article/10.1007/s11831-019-09352-w
• Budday S., Sarem M., Starck L., Sommer G., Pfefferle J., Phunchago N., Kuhl E., Paulsen F., Steinmann P., Shastri VP., Holzapfel GA.:
  Towards microstructure-informed material models for human brain tissue
  In: Acta Biomaterialia 104 (2020), p. 53-65
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2019.12.030
  URL: https://www.sciencedirect.com/science/article/pii/S1742706119308682?via=ihub
• Caspari M., Landkammer P., Steinmann P.:
  Shape Optimization of a Backward Extrusion Process Using a Non-Invasive Form Finding Algorithm
  In: Procedia Manufacturing 23rd International Conference on Material Forming (2020), p. 873-880
  ISSN: 2351-9789
  DOI: 10.1016/j.promfg.2020.04.273
• Comellas Sanfeliu E., Budday S., Pelteret JP., Holzapfel GA., Steinmann P.:
  Modeling the porous and viscous responses of human brain tissue behavior
  In: Computer Methods in Applied Mechanics and Engineering 369 (2020), Article No.: 113128
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2020.113128
  URL: https://www.sciencedirect.com/science/article/pii/S0045782520303133
• Cui Y., Ravnik J., Hriberšek M., Steinmann P.:
  Towards a unified shear-induced lift model for prolate spheroidal particles moving in arbitrary non-uniform flow
  In: Computers & Fluids 196 (2020), Article No.: 104323
  ISSN: 0045-7930
  DOI: 10.1016/j.compfluid.2019.104323
• Davydov D., Pelteret JP., Arndt D., Kronbichler M., Steinmann P.:
  A matrix-free approach for finite-strain hyperelastic problems using geometric multigrid
  In: International Journal for Numerical Methods in Engineering (2020)
  ISSN: 0029-5981
  DOI: 10.1002/nme.6336
• Distler T., Schaller E., Steinmann P., Boccaccini AR., Budday S.:
  Alginate-based hydrogels show the same complex mechanical behavior as brain tissue
  In: Journal of the Mechanical Behavior of Biomedical Materials 111 (2020), Article No.: 103979
  ISSN: 1751-6161
  DOI: 10.1016/j.jmbbm.2020.103979
  URL: https://www.sciencedirect.com/science/article/abs/pii/S1751616120305312
• Hasegawa R., Mehnert M., Mergheim J., Steinmann P., Kakimoto K.:
  Behavior of vibration energy harvesters composed of polymer fibers and piezoelectric ceramic particles
  In: Sensors and Actuators A-Physical 303 (2020), Article No.: 111699
  ISSN: 0924-4247
  DOI: 10.1016/j.sna.2019.111699
• Javili A., Firooz S., McBride AT., Steinmann P.:
  The computational framework for continuum-kinematics-inspired peridynamics
  In: Computational Mechanics (2020)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-020-01885-3
• Kergaßner A., Burkhardt C., Lippold D., Kergaßner M., Pflug L., Budday D., Steinmann P., Budday S.:
  Memory-based meso-scale modeling of Covid-19
  In: Computational Mechanics (2020)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-020-01883-5
• Liao Z., Hossain M., Yao X., Mehnert M., Steinmann P.:
  On thermo-viscoelastic experimental characterization and numerical modelling of VHB polymer
  In: International Journal of Non-Linear Mechanics 118 (2020), Article No.: 103263
  ISSN: 0020-7462
  DOI: 10.1016/j.ijnonlinmec.2019.103263
• Liu Z., McBride A., Saxena P., Steinmann P.:
  Assessment of an isogeometric approach with Catmull–Clark subdivision surfaces using the Laplace–Beltrami problems
  In: Computational Mechanics (2020)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-020-01877-3
• McBride AT., Davydov D., Steinmann P.:
  Modelling the flexoelectric effect in solids: A micromorphic approach
  In: Computer Methods in Applied Mechanics and Engineering 371 (2020), Article No.: 113320
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2020.113320
• Misra JC., Mallick B., Steinmann P.:
  Temperature distribution and entropy generation during Darcy–Forchheimer–Brinkman electrokinetic flow in a microfluidic tube subject to a prescribed heat flux
  In: Meccanica (2020)
  ISSN: 0025-6455
  DOI: 10.1007/s11012-020-01152-y
• Papastavrou A., Schmidt I., Deng K., Steinmann P.:
  On age-dependent bone remodeling
  In: Journal of Biomechanics (2020), Article No.: 109701
  ISSN: 0021-9290
  DOI: 10.1016/j.jbiomech.2020.109701
• Papastavrou A., Schmidt I., Steinmann P.:
  On biological availability dependent bone remodeling
  In: Computer Methods in Biomechanics and Biomedical Engineering (2020)
  ISSN: 1025-5842
  DOI: 10.1080/10255842.2020.1736050
• Pelteret JP., Steinmann P.:
  Magneto-active polymers: Fabrication, characterisation, modelling and simulation at the micro- and macro-scale
  De Gruyter, 2020
  ISBN: 9783110418576
  DOI: 10.1515/9783110418576
• Ries M., Steinmann P., Pfaller S.:
  Characterization of Polystyrene Under Shear Deformation Using Molecular Dynamics
  In: Developments and Novel Approaches in Nonlinear Solid Body Mechanics, Springer, Cham, 2020, p. 219-229
  ISBN: 9783030504595
  DOI: 10.1007/978-3-030-50460-1_14
• Soldner D., Greiner S., Burkhardt C., Drummer D., Steinmann P., Mergheim J.:
  Numerical and experimental investigation of the isothermal assumption in selective laser sintering of PA12
  In: Additive Manufacturing (2020)
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2020.101676
• Spannraft L., Ekh M., Larsson F., Runesson K., Steinmann P.:
  Grain boundary interaction based on gradient crystal inelasticity and decohesion
  In: Computational Materials Science 178 (2020), Article No.: 109604
  ISSN: 0927-0256
  DOI: 10.1016/j.commatsci.2020.109604
• Steinmann P.:
  ANALYTICAL MECHANICS ALLOWS NOVEL VISTAS ON MATHEMATICAL EPIDEMIC DYNAMICS MODELING
  In: Mathematics and Mechanics of Complex Systems 8 (2020), p. 321-343
  ISSN: 2326-7186
  DOI: 10.2140/memocs.2020.8.321
• Söhngen B., Caspari M., Willner K., Steinmann P.:
  On Optimization Strategies for Inverse Problems in Metalforming
  In: Marion Merklein, A. Erman Tekkaya, Bernd-Arno Behrens (ed.): Sheet Bulk Metal Forming - Research Results of the TCRC73, Zug: Springer Nature Switzerland, 2020, p. 354-377
  DOI: 10.1007/978-3-030-61902-2_16
• Verhnjak O., Hriberšek M., Steinmann P., Ravnik J.:
  A novel two-way coupling model for Euler-Lagrange simulations of multiphase flow
  In: Engineering Analysis With Boundary Elements 119 (2020), p. 119-132
  ISSN: 0955-7997
  DOI: 10.1016/j.enganabound.2020.07.012
• Zabihyan R., Mergheim J., Pelteret JP., Brands B., Steinmann P.:
  FE2 simulations of magnetorheological elastomers: influence of microscopic boundary conditions, microstructures and free space on the macroscopic responses of MREs
  In: International Journal of Solids and Structures 193-194 (2020), p. 338-356
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2020.02.015

2019

• Arora A., Kumar A., Steinmann P.:
  A computational approach to obtain nonlinearly elastic constitutive relations of special Cosserat rods
  In: Computer Methods in Applied Mechanics and Engineering 350 (2019), p. 295-314
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2019.02.032
• Boddu V., Davydov D., Eidel B., Steinmann P.:
  Cutoff-Based Modeling of Coulomb Interactions for Atomistic-to-Continuum Multiscale Methods
  In: Multiscale Science and Engineering 1 (2019), p. 299 - 317
  ISSN: 2524-4523
  DOI: 10.1007/s42493-019-00027-z
  URL: https://link.springer.com/article/10.1007/s42493-019-00027-z
• Boddu V., Steinmann P.:
  On the emergence of out-of-plane ferroelectricity in ultrathin films
  In: Archive of Applied Mechanics 89 (2019), p. 1171-1181
  ISSN: 0939-1533
  DOI: 10.1007/s00419-019-01522-3
• Brands B., Davydov D., Mergheim J., Steinmann P.:
  Reduced-Order Modelling and Homogenisation in Magneto-Mechanics: A Numerical Comparison of Established Hyper-Reduction Methods
  In: Mathematical and Computational Applications 24 (2019)
  ISSN: 1300-686X
  DOI: 10.3390/mca24010020
• Budday S., Holzapfel GA., Steinmann P., Kuhl E.:
  Challenges and perspectives in brain tissue testing and modeling
  In: Proceedings in Applied Mathematics and Mechanics accepted (2019)
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201900269
• Burkhardt C., Soldner D., Steinmann P., Mergheim J.:
  An energetically consistent heat input model for additive manufacturing
  In: Proceedings in Applied Mathematics and Mechanics 19 (2019)
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201900297
• Cai X., Steinmann P., Yao X., Wang J.:
  Thermodynamic formulation of a unified multi-mechanism continuum viscoplastic damage model with application to high-Cr steels
  In: International Journal of Plasticity 114 (2019), p. 15-39
  ISSN: 0749-6419
  DOI: 10.1016/j.ijplas.2018.09.011
• Cui Y., Ravnik J., Steinmann P., Hribersek M.:
  Settling characteristics of nonspherical porous sludge flocs with nonhomogeneous mass distribution
  In: Water Research 158 (2019), p. 159-170
  ISSN: 0043-1354
  DOI: 10.1016/j.watres.2019.04.017
• Cui Y., Ravnik J., Verhnjak O., Hribersek M., Steinmann P.:
  A novel model for the lift force acting on a prolate spheroidal particle in arbitrary non-uniform flow. Part II. Lift force taking into account the non-streamwise flow shear
  In: International Journal of Multiphase Flow 111 (2019), p. 232-240
  ISSN: 0301-9322
  DOI: 10.1016/j.ijmultiphaseflow.2018.12.003
• Firooz S., Saeb S., Chatzigeorgiou G., Meraghni F., Steinmann P., Javili A.:
  Systematic study of homogenization and the utility of circular simplified representative volume element
  In: Mathematics and Mechanics of Solids (2019)
  ISSN: 1081-2865
  DOI: 10.1177/1081286518823834
• Javili A., McBride AT., Steinmann P.:
  Continuum-kinematics-inspired peridynamics. Mechanical problems
  In: Journal of the Mechanics and Physics of Solids 131 (2019), p. 125-146
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2019.06.016
• Kergaßner A., Mergheim J., Steinmann P.:
  Gradient Enhanced Crystal Plasticity in Additive Manufacturing Identification of a Macroscopic Yield Criterion
  In: Proceedings in Applied Mathematics and Mechanics (2019)
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201900308
• Landkammer P., Jobst A., Kiener C., Steinmann P., Merklein M.:
  Investigations on residual stress generation in full-forward-extrusion
  In: Production Engineering (2019)
  ISSN: 0944-6524
  DOI: 10.1007/s11740-019-00892-5
• Landkammer P., Jobst A., Kiener C., Steinmann P., Merklein M.:
  Mechanisms of residual stress generation in full-forward-extrusion
  In: Production Engineering (2019)
  ISSN: 0944-6524
• Landkammer P., Steinmann P.:
  Plastic dislocation and incompatibility density as indicators for residual stresses
  15th International Conference on Computational Plasticity. Fundamentals and Applications, COMPLAS 2019 (Barcelona, September 3, 2019 - September 5, 2019)
  In: Eugenio Onate, D. Roger J. Owen, Djordje Peric, Michele Chiumenti, Eduardo de Souza Neto (ed.): 15th International Conference on Computational Plasticity. Fundamentals and Applications, COMPLAS 2019 2019
• Mcbride A., Davydov D., Steinmann P.:
  Modelling the flexoelectric effect in solids
  7th International Conference on Structural Engineering, Mechanics and Computation (SEMC) (Cape Town, September 2, 2019 - September 4, 2019)
  In: ADVANCES IN ENGINEERING MATERIALS, STRUCTURES AND SYSTEMS: INNOVATIONS, MECHANICS AND APPLICATIONS, LEIDEN: 2019
  DOI: 10.1201/9780429426506-47
• Mehnert M., Steinmann P.:
  On the influence of the compliant electrodes on the mechanical behavior of VHB 4905
  In: Computational Materials Science 160 (2019), p. 287-294
  ISSN: 0927-0256
  DOI: 10.1016/j.commatsci.2019.01.011
• Pfaller S., Kergaßner A., Steinmann P.:
  Optimisation of the Capriccio Method to Couple Particle- and Continuum-Based Simulations of Polymers
  In: Multiscale Science and Engineering (2019)
  ISSN: 2524-4523
  DOI: 10.1007/s42493-019-00028-y
• Pivovarov D., Hahn V., Steinmann P., Willner K., Leyendecker S.:
  Fuzzy dynamics of multibody systems with polymorphic uncertainty in the material microstructure
  In: Computational Mechanics 64 (2019), p. 1601-1619
  ISSN: 0178-7675
  DOI: 10.1007/s00466-019-01737-9
• Pivovarov D., Steinmann P., Willner K.:
  Acceleration of the spectral stochastic FEM using POD and element based discrete empirical approximation for a micromechanical model of heterogeneous materials with random geometry
  In: Computer Methods in Applied Mechanics and Engineering (2019), Article No.: 112689
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2019.112689
• Pivovarov D., Willner K., Steinmann P.:
  On spectral fuzzy–stochastic FEM for problems involving polymorphic geometrical uncertainties
  In: Computer Methods in Applied Mechanics and Engineering 350 (2019), p. 432-461
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2019.02.024
• Pivovarov D., Willner K., Steinmann P., Brumme S., Müller M., Srisupattarawanit T., Ostermeyer GP., Henning C., Ricken T., Kastian S., Reese S., Moser D., Grasedyck L., Biehler J., Pfaller M., Wall W., Kohlsche T., Estorff Ov., Gruhlke R., Eigel M., Ehre M., Papaioannou I., Straub D., Leyendecker S.:
  Challenges of order reduction techniques for problems involving polymorphic uncertainty
  In: GAMM-Mitteilungen (2019), Article No.: e201900010
  ISSN: 0936-7195
  DOI: 10.1002/gamm.201900011
• Pivovarov D., Zabihyan R., Mergheim J., Willner K., Steinmann P.:
  On periodic boundary conditions and ergodicity in computational homogenization of heterogeneous materials with random microstructure
  In: Computer Methods in Applied Mechanics and Engineering 357 (2019)
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2019.07.032
• Ries M., Possart G., Steinmann P., Pfaller S.:
  Extensive CGMD simulations of atactic PS providing pseudo experimental data to calibrate nonlinear inelastic continuum mechanical constitutive laws
  In: Polymers 11 (2019), Article No.: 1824
  ISSN: 2073-4360
  DOI: 10.3390/polym11111824
• Ries M., Steinmann P., Pfaller S.:
  Investigation of the Mechanical Behavior of Polystyrene using Molecular Dynamics
  In: Proceedings in Applied Mathematics and Mechanics 19 (2019)
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201900015
• Saeb S., Steinmann P., Javili A.:
  Designing tunable composites with general interfaces
  In: International Journal of Solids and Structures (2019)
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2019.04.006
• Saeb S., Steinmann P., Javili A.:
  On effective behavior of microstructures embedding general interfaces with damage
  In: Computational Mechanics (2019)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-019-01727-x
• Smriti ., Kumar A., Großmann A., Steinmann P.:
  A thermoelastoplastic theory for special Cosserat rods
  In: Mathematics and Mechanics of Solids 24 (2019), p. 686-700
  ISSN: 1081-2865
  DOI: 10.1177/1081286517754132
• Spannraft L., Mergheim J., Steinmann P.:
  Implementation of generalized mechanical interfaces
  In: Proceedings in Applied Mathematics and Mechanics 19 (2019)
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201900031
• Steinmann P., Kergaßner A., Landkammer P., Zbib HM.:
  A novel continuum approach to gradient plasticity based on the complementing concepts of dislocation and disequilibrium densities
  In: Journal of the Mechanics and Physics of Solids 132 (2019), Article No.: 103680
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2019.103680
• Steinmann P., Mcbride A., Javili A.:
  Novel vistas on the foundations of peridynamics
  7th International Conference on Structural Engineering, Mechanics and Computation (SEMC) (Cape Town, September 2, 2019 - September 4, 2019)
  In: ADVANCES IN ENGINEERING MATERIALS, STRUCTURES AND SYSTEMS: INNOVATIONS, MECHANICS AND APPLICATIONS, LEIDEN: 2019
  DOI: 10.1201/9780429426506-58

2018

• Andres S., Steinmann P., Budday S.:
  The origin of compression influences geometric instabilities in bilayers
  In: Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences (2018)
  ISSN: 1364-5021
  DOI: 10.1098/rspa.2018.0267
• Budday S., Sommer G., Paulsen F., Holzapfel GA., Steinmann P., Kuhl E.:
  Region‐ and loading‐specific finite viscoelasticity of human brain tissue
  In: Proceedings in Applied Mathematics and Mechanics 18 (2018), Article No.: e201800169
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201800169
• Caspari M., Landkammer P., Steinmann P.:
  A non-invasive node-based form finding approach with discretization-independent target configuration
  In: Advanced Modeling and Simulation in Engineering Sciences 5 (2018), Article No.: 11
  ISSN: 2213-7467
  DOI: 10.1186/s40323-018-0104-9
• Caspari M., Landkammer P., Steinmann P.:
  Illustration of an improved non-invasive form finding algorithm
  ESAFORM 2018 (Palermo, April 23, 2018 - April 25, 2018)
  In: American Institute of Physics Inc. (ed.): 21st International ESAFORM Conference on Material Forming 2018
  DOI: 10.1063/1.5034960
• Cui Y., Ravnik J., Hribersek M., Steinmann P.:
  A novel model for the lift force acting on a prolate spheroidal particle in an arbitrary non-uniform flow. Part I. Lift force due to the streamwise flow shear
  In: International Journal of Multiphase Flow 104 (2018), p. 103-112
  ISSN: 0301-9322
  DOI: 10.1016/j.ijmultiphaseflow.2018.03.007
• Cui Y., Ravnik J., Hribersek M., Steinmann P.:
  On constitutive models for the momentum transfer to particles in fluid-dominated two-phase flows
  Springer Verlag, 2018
  (Advanced Structured Materials, Vol.80)
  DOI: 10.1007/978-3-319-70563-7_1
• Davydov D., Heister T., Kronbichler M., Steinmann P.:
  Matrix-Free Locally Adaptive Finite Element Solution of Density-Functional Theory With Nonorthogonal Orbitals and Multigrid Preconditioning
  In: physica status solidi (b) 255 (2018), Article No.: 1800069
  ISSN: 0370-1972
  DOI: 10.1002/pssb.201800069
• Greiner S., Soldner D., Jaksch A., Zhao M., Mergheim J., Steinmann P., Wudy K., Drummer D.:
  Experimentelle und simulative Untersuchung der zeit- und ortsaufgelösten Temperaturfelder beim selektiven Strahlschmelzen von Kunststoffen
  6. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, December 13, 2018 - December 13, 2018)
• Hossain M., Steinmann P.:
  Modelling electro-active polymers with a dispersion-type anisotropy
  In: Smart Materials and Structures 27 (2018), Article No.: 025010
  ISSN: 1361-665X
  DOI: 10.1088/1361-665X/aa9f88
• Hübner D., Gotterbarm M., Kergaßner A., Köpf J., Pobel C., Markl M., Mergheim J., Steinmann P., Körner C., Stingl M.:
  Topology Optimization in Additive Manufacturing Considering the Grain Structure of Inconel 718 using Numerical Homogenization
  iCAT 2018 (Maribor, October 10, 2018 - October 11, 2018)
  In: Proceedings of 7th International Conference on Additive Technologies 2018
• Kergaßner A., Mergheim J., Steinmann P.:
  Modeling of additively manufactured materials using gradient-enhanced crystal plasticity
  In: Computers & Mathematics with Applications (2018)
  ISSN: 0898-1221
  DOI: 10.1016/j.camwa.2018.05.016
• Kergaßner A., Mergheim J., Steinmann P.:
  Single crystal plasticity – A mesoscale based approach for modeling the mechanics of additively manufactured Inconel 718
  In: Proceedings in Applied Mathematics and Mechanics (2018)
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201800389
• Käßmair S., Steinmann P.:
  Computational first-order homogenization in chemo-mechanics
  In: Archive of Applied Mechanics 88 (2018), p. 271-286
  ISSN: 0939-1533
  DOI: 10.1007/s00419-017-1287-0
• Landkammer P., Caspari M., Steinmann P.:
  Improvements on a non-invasive, parameter-free approach to inverse form finding
  In: Computational Mechanics 61 (2018), p. 433-447
  ISSN: 0178-7675
  DOI: 10.1007/s00466-017-1468-2
• Mcbride AT., Reddy BD., Steinmann P.:
  Dissipation-consistent modelling and classification of extended plasticity formulations
  In: Journal of the Mechanics and Physics of Solids 119 (2018), p. 118-139
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2018.06.002
• Mehnert M., Mathieu-Pennober T., Steinmann P.:
  On the Influence of the Coupled Invariant in Thermo-Electro-Elasticity
  In: Generalized Models and Non-classical Approaches in Complex Materials, 2018, p. 533-554
  DOI: 10.1007/978-3-319-72440-9_28
• Mehnert M., Mokarram H., Steinmann P.:
  Numerical modelling of thermo-electro-viscoelasticity with field-dependent material parameters
  In: International Journal of Non-Linear Mechanics 106 (2018), p. 13-24
  ISSN: 0020-7462
  DOI: 10.1016/j.ijnonlinmec.2018.08.016
• Pivovarov D., Oberleiter T., Willner K., Steinmann P.:
  Fuzzy-Stochastic FEM-based homogenization framework for materials with polymorphic uncertainties in the microstructure
  In: International Journal for Numerical Methods in Engineering (2018)
  ISSN: 0029-5981
  DOI: 10.1002/nme.5947
• Pivovarov D., Steinmann P., Willner K.:
  Two reduction methods for stochastic FEM based homogenization using global basis functions
  In: Computer Methods in Applied Mechanics and Engineering 332 (2018), p. 488-519
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2018.01.002
• Rajagopal A., Kraus M., Steinmann P.:
  Hyperelastic analysis based on a polygonal finite element method
  In: Mechanics of Advanced Materials and Structures 25 (2018), p. 930-942
  ISSN: 1537-6494
  DOI: 10.1080/15376494.2017.1329463
• Redel M., Walter B., Kaschta J., Steinmann P., Schubert DW.:
  Resonance phenomena in oscillatory shear rheometry: Influence of material parameters
  Nordic Polymer Days 2018 (Kopenhagen, May 28, 2018 - May 30, 2018)
• Schmitt O., Steinmann P.:
  Control of minimum member size in parameter-free structural shape optimization by a medial axis approximation
  In: Computational Mechanics 61 (2018), p. 717-727
  ISSN: 0178-7675
  DOI: 10.1007/s00466-017-1477-1
• Valizadeh I., Steinmann P., Javili A.:
  Growth-induced instabilities of an elastic film on a viscoelastic substrate: Analytical solution and computational approach via eigenvalue analysis
  In: Journal of Mechanics of Materials and Structures 13 (2018), p. 571-585
  ISSN: 1559-3959
  DOI: 10.2140/jomms.2018.13.571
• Zabihyan R., Mergheim J., Javili A., Steinmann P.:
  Aspects of computational homogenization in magneto-mechanics: Boundary conditions, RVE size and microstructure composition
  In: International Journal of Solids and Structures 130-131 (2018), p. 105-121
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2017.10.009

2017

• Boddu V., Endres F., Steinmann P.:
  Molecular dynamics study of ferroelectric domain nucleation and domain switching dynamics
  In: Scientific Reports (2017)
  ISSN: 2045-2322
  DOI: 10.1038/s41598-017-01002-0
• Boddu V., Endres F., Steinmann P.:
  Non-linear switching kinetics of ferroelectric mono-domain single crystals
  8th ECCOMAS Thematic Conference on Smart Structures and the 6th International Conference on Smart Materials and Nanotechnology in Engineering (Madrid, June 5, 2017 - June 8, 2017)
  URL: http://congress.cimne.com/smart2017/admin/files/fileabstract/a41.pdf
• Budday S., Andres S., Walter B., Steinmann P., Kuhl E.:
  Wrinkling instabilities in soft bi-layered systems
  In: Philosophical Transactions of the Royal Society A-Mathematical Physical and Engineering Sciences 375 (2017)
  ISSN: 1364-503X
  DOI: 10.1098/rsta.2016.0163
• Budday S., Sommer G., Birkl C., Langkammer C., Haybaeck J., Kohnert J., Bauer M., Paulsen F., Steinmann P., Kuhl E., Holzapfel GA.:
  Mechanical characterization of human brain tissue
  In: Acta Biomaterialia 48 (2017), p. 319–340
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2016.10.036
• Budday S., Sommer G., Haybaeck J., Steinmann P., Holzapfel GA., Kuhl E.:
  Rheological characterization of human brain tissue
  In: Acta Biomaterialia (2017)
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2017.06.024
• Budday S., Sommer G., Holzapfel GA., Steinmann P., Kuhl E.:
  Viscoelastic parameter identification of human brain tissue
  In: Journal of the Mechanical Behavior of Biomedical Materials 74 (2017), p. 463-476
  ISSN: 1751-6161
  DOI: 10.1016/j.jmbbm.2017.07.014
• Budday S., Steinmann P.:
  On the influence of inhomogeneous stiffness and growth on mechanical instabilities in the developing brain
  In: International Journal of Solids and Structures (2017)
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2017.08.010
• Carstensen C., Ebobisse F., McBride AT., Reddy BD., Steinmann P.:
  Flow relations and yield functions for dissipative strain-gradient plasticity
  International conference on Emerging Trends in Applied Mathematics and Mechanics, ETAMM 2016 (Perpignan, FRA, May 30, 2016 - June 3, 2016)
  In: Mircea Sofonea, Francesco dell’Isola, David Steigmann (ed.): Advanced Structured Materials 2017
  DOI: 10.1007/978-981-10-3764-1_3
• Carstensen C., Ebobisse F., Mcbride AT., Reddy BD., Steinmann P.:
  Some properties of the dissipative model of strain-gradient plasticity
  In: Philosophical Magazine 97 (2017), p. 693-717
  ISSN: 1478-6435
  DOI: 10.1080/14786435.2016.1274836
• Caspari M., Landkammer P., Steinmann P.:
  Inverse form finding with H-adaptivity and an application to a notch stamping process
  COMPLAS 2017 (Barcelona, September 5, 2017 - September 7, 2018)
  In: International Center for Numerical Methods in Engineering (ed.): Proceedings of the 14th International Conference on Computational Plasticity - Fundamentals and Applications 2017
  URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85045301572∂nerID=40&md5=538752db49a36adbf24b6bb7f9ec5e0b
• Davydov D., Gerasimov T., Pelteret JP., Steinmann P.:
  Convergence study of the h-adaptive PUM and the hp-adaptive FEM applied to eigenvalue problems in quantum mechanics
  In: Advanced Modeling and Simulation in Engineering Sciences 4 (2017), p. 7
  ISSN: 2213-7467
  DOI: 10.1186/s40323-017-0093-0
• Esmaeili A., Steinmann P., Javili A.:
  COUPLED THERMALLY GENERAL IMPERFECT AND MECHANICALLY COHERENT ENERGETIC INTERFACES SUBJECT TO IN-PLANE DEGRADATION
  In: Journal of Mechanics of Materials and Structures (2017)
  ISSN: 1559-3959
  Open Access: https://msp.org/jomms/2017/12-3/jomms-v12-n3-p03-p.pdf
  URL: https://msp.org/jomms/2017/12-3/jomms-v12-n3-p03-p.pdf
• Esmaeili A., Steinmann P., Javili A.:
  Surface plasticity: theory and computation
  In: Computational Mechanics (2017)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-017-1517-x
  URL: https://link.springer.com/article/10.1007/s00466-017-1517-x?wt_mc=Internal.Event.1.SEM.ArticleAuthorOnlineFirst#citeas
• Fillep S., Mergheim J., Steinmann P.:
  Towards an efficient two-scale approach to model technical textiles
  In: Computational Mechanics 59 (2017), p. 385-401
  ISSN: 0178-7675
  DOI: 10.1007/s00466-016-1354-3
• Javili A., Steinmann P., Mosler J.:
  Micro-to-macro transition accounting for general imperfect interfaces
  In: Computer Methods in Applied Mechanics and Engineering 317 (2017), p. 274-317
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2016.12.025
• Kasi B., Rajagopal A., Steinmann P.:
  Adaptive Poly-FEM for the analysis of plane elasticity problems
  In: International Journal of Computational Methods in Engineering Science and Mechanics 18 (2017), p. 146-165
  ISSN: 1550-2287
  DOI: 10.1080/15502287.2017.1301596
• Landkammer P., Söhngen B., Steinmann P., Willner K.:
  On gradient-based optimization strategies for inverse problems in metal forming
  In: GAMM-Mitteilungen 40 (2017), p. 27-50
  ISSN: 0936-7195
  DOI: 10.1002/gamm.201710004
• Mehnert M., Mokarram H., Steinmann P.:
  Towards a thermo-magneto-mechanical coupling framework for magneto-rheological elastomers
  In: International Journal of Solids and Structures (2017)
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2017.08.022
• Mehnert M., Pelteret JP., Steinmann P.:
  Numerical modelling of nonlinear thermo-electro-elasticity
  In: Mathematics and Mechanics of Solids (2017)
  ISSN: 1081-2865
  DOI: 10.1177/1081286517729867
• Riedlbauer DR., Scharowsky T., Singer R., Steinmann P., Körner C., Mergheim J.:
  Macroscopic simulation and experimental measurement of melt pool characteristics in selective electron beam melting of Ti-6Al-4V
  In: International Journal of Advanced Manufacturing Technology (2017)
  ISSN: 0268-3768
  DOI: 10.1007/s00170-016-8819-6
  URL: http://link.springer.com/article/10.1007/s00170-016-8819-6
• Riehl S., Steinmann P.:
  On structural shape optimization using an embedding domain discretization technique
  In: International Journal for Numerical Methods in Engineering 109 (2017), p. 1315 - 1343
  ISSN: 0029-5981
  DOI: 10.1002/nme.5326
• Saeb S., Steinmann P., Javili A.:
  Bounds on size-dependent behavior of composites
  In: Philosophical Magazine 17 (2017), p. 1-27
  ISSN: 1478-6435
  DOI: 10.1080/14786435.2017.1408967
• Soldner D., Brands B., Zabihyan R., Mergheim J., Steinmann P.:
  A numerical study of different projection-based model reduction techniques applied to computational homogenisation
  In: Computational Mechanics (2017)
  ISSN: 0178-7675
  DOI: 10.1007/s00466-017-1428-x
• Soldner D., Steinmann P., Mergheim J.:
  Thermal modelling of selective beam melting processes using heterogeneous time step sizes
  2017 Simulation for Additive Manufacturing, Sinam 2017 (Munich, DEU, October 11, 2017 - October 13, 2017)
  In: Simulation for Additive Manufacturing 2017, Sinam 2017 2017
• Walter B., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
  On the wall slip phenomenon of elastomers in oscillatory shear measurements using parallel-plate rotational rheometry: I. Detecting wall slip
  In: Polymer Testing (2017)
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2017.05.035
• Walter B., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
  On the wall slip phenomenon of elastomers in oscillatory shear measurements using parallel-plate rotational rheometry: II. Influence of experimental conditions
  In: Polymer Testing 61 (2017), p. 455-463
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2017.05.036
• Walter B., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
  Preparation of magnetorheological elastomers and their slip-free characterization by means of parallel-plate rotational rheometry
  In: Smart Materials and Structures 26 (2017), Article No.: 085004
  ISSN: 1361-665X
  DOI: 10.1088/1361-665X/aa6b63
  URL: http://iopscience.iop.org/article/10.1088/1361-665X/aa6b63

2016

• Brands B., Mergheim J., Steinmann P.:
  Reduced-order modelling for linear heat conduction with parametrised moving heat sources
  In: GAMM-Mitteilungen 39 (2016), p. 170-188
  ISSN: 0936-7195
  DOI: 10.1002/gamm.201610011
• Endres F., Steinmann P.:
  Size effects of 109? domain walls in rhombohedral barium titanate single crystals--A molecular statics analysis
  In: Journal of Applied Physics 119 (2016)
  ISSN: 0021-8979
  DOI: 10.1063/1.4939600
• Esmaeili A., Javili A., Steinmann P.:
  A thermo-mechanical cohesive zone model accounting for mechanically energetic Kapitza interfaces
  In: International Journal of Solids and Structures (2016)
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2016.04.035
  URL: http://www.sciencedirect.com/science/article/pii/S0020768316300592
• Esmaeili A., Javili A., Steinmann P.:
  Coherent energetic interfaces accounting for in-plane degradation
  In: International Journal of Fracture (2016)
  ISSN: 0376-9429
  URL: https://link.springer.com/article/10.1007%2Fs10704-016-0160-4
• Esmaeili A., Javili A., Steinmann P.:
  Highly-conductive energetic coherent interfaces subject to in-plane degradation
  In: Mathematics and Mechanics of Solids (2016)
  ISSN: 1081-2865
  DOI: 10.1177/1081286516642818
  URL: http://journals.sagepub.com/doi/abs/10.1177/1081286516642818
• Esmaeili A., Javili A., Steinmann P.:
  Non-coherent energetic interfaces accounting for degradation
  In: Computational Mechanics (2016)
  ISSN: 0178-7675
  URL: https://link.springer.com/article/10.1007%2Fs00466-016-1342-7
• Javili A., Saeb S., Steinmann P.:
  Aspects of implementing constant traction boundary conditions in computational homogenization via semi-Dirichlet boundary conditions
  In: Computational Mechanics (2016), p. 1-15
  ISSN: 0178-7675
  DOI: 10.1007/s00466-016-1333-8
• Kergaßner A., Mergheim J., Steinmann P.:
  Mesoscopic modelling of additively manufactured Inconel 718
  5th International Conference on Additive Technologies - iCAT2016 (Nürnberg)
  In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (ed.): Proceedings 6th International Conference on Additive Technologies - iCAT2016, Ljubljana: 2016
• Kergaßner A., Mergheim J., Steinmann P.:
  Modelling additive manufactured materials using a crystal plasticity model
  In: Proceedings in Applied Mathematics and Mechanics 16 (2016), p. 355-356
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201610166
• Käßmair S., Steinmann P.:
  Comparative computational analysis of the Cahn--Hilliard equation with emphasis on C1-continuous methods
  In: Journal of Computational Physics 322 (2016), p. 783-803
  ISSN: 0021-9991
  DOI: 10.1016/j.jcp.2016.07.005
• Landkammer P., Schneider T., Schulte RK., Steinmann P., Merklein M.:
  A non-invasive form finding approach with application to metal forming
  In: Production Engineering 10 (2016), p. 93-102
  ISSN: 0944-6524
  DOI: 10.1007/s11740-016-0659-6
• Landkammer P., Steinmann P.:
  A non-invasive heuristic approach to shape optimization in forming
  In: Computational Mechanics accepted (2016), p. 169-191
  ISSN: 0178-7675
  DOI: 10.1007/s00466-015-1226-2
• Landkammer P., Steinmann P.:
  Case study on the influence of kinematic hardening within a parameter-free and non-invasive form finding approach
  Int. Conf. on Numerical Methods in Industrial Forming Processes (Troyes, July 4, 2016 - July 6, 2016)
  In: MATEC Web of Conferences 2016
  DOI: 10.1051/matecconf/20168011007
• Liu S., Pfaller S., Rahimi M., Possart G., Steinmann P., Böhm MC., Müller-Plathe F.:
  Uniaxial deformation of polystyrene–silica nanocomposites studied by hybrid molecular dynamics–finite element simulations
  In: Computational Materials Science 129 (2016), p. 1-12
  ISSN: 0927-0256
  DOI: 10.1016/j.commatsci.2016.11.031
• Mehnert M., Mokarram H., Steinmann P.:
  On nonlinear thermo-electro-elasticity
  In: Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences (2016)
  ISSN: 1364-5021
• Pelteret JP., Davydov D., McBride A., Vu DK., Steinmann P.:
  Computational electro- and magneto-elasticity for quasi-incompressible media immersed in free space
  In: International Journal for Numerical Methods in Engineering 108 (2016), p. 1307--1342
  ISSN: 0029-5981
  DOI: 10.1002/nme.5254
• Pfaller S., Possart G., Steinmann P., Rahimi M., Müller-Plathe F., Böhm MC.:
  Investigation of interphase effects in silica-polystyrene nanocomposites based on a hybrid molecular-dynamics-finite-element simulation framework
  In: Physical Review E - Statistical, Nonlinear, and Soft Matter Physics 93 (2016), Article No.: 052505
  ISSN: 1550-2376
  DOI: 10.1103/PhysRevE.93.052505
• Pivovarov D., Steinmann P.:
  Modified SFEM for computational homogenization of heterogeneous materials with microstructural geometric uncertainties
  In: Computational Mechanics 57 (2016), p. 123-147
  ISSN: 0178-7675
  DOI: 10.1007/s00466-015-1224-4
• Pivovarov D., Steinmann P.:
  On stochastic FEM based computational homogenization of magneto-active heterogeneous materials with random microstructure
  In: Computational Mechanics 58 (2016), p. 981-1002
  ISSN: 0178-7675
  DOI: 10.1007/s00466-016-1329-4
• Saeb S., Steinmann P., Javili A.:
  Aspects of Computational Homogenization at Finite Deformations: A Unifying Review From Reuss' to Voigt's Bound
  In: Applied Mechanics Reviews 68 (2016), Article No.: 050801
  ISSN: 0003-6900
  DOI: 10.1115/1.4034024
• Schindler S., Mergheim J., Zimmermann M., Aurich JC., Steinmann P.:
  Numerical homogenization of elastic and thermal material properties for metal matrix composites (MMC)
  In: Continuum Mechanics and Thermodynamics (2016)
  ISSN: 0935-1175
  DOI: 10.1007/s00161-016-0515-0
• Schindler S., Steinmann P., Aurich JC., Zimmermann M.:
  A thermo-viscoplastic constitutive law for isotropic hardening of metals
  In: Archive of Applied Mechanics 2017 (2016), p. 129-157
  ISSN: 0939-1533
  DOI: 10.1007/s00419-016-1181-1
• Schmitt O., Friederich J., Riehl S., Steinmann P.:
  On the formulation and implementation of geometric and manufacturing constraints in node-based shape optimization
  In: Structural and Multidisciplinary Optimization 53 (2016), p. 881 - 892
  ISSN: 1615-147X
  DOI: 10.1007/s00158-015-1359-0
• Schmitt O., Steinmann P.:
  On curvature approximation in 2D and 3D parameter-free shape optimization
  In: Structural and Multidisciplinary Optimization (2016)
  ISSN: 1615-147X
  DOI: 10.1007/s00158-016-1595-y
• Soldner D., Brands B., Zabihyan R., Steinmann P., Mergheim J.:
  Computational Homogenisation using Reduced-Order Modelling applied to Hyperelasticity
  In: Proceedings in Applied Mathematics and Mechanics 16 (2016), p. 551-552
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201610264
• Soldner D., Steinmann P., Mergheim J.:
  Reducing computational cost of the simulation of selective laser melting of PA12
  6th International Conference on Additive Technologies - iCAT 2016 (Nürnberg, November 29, 2016 - November 30, 2016)
  In: Igor Drstvenšek, Dietmar Drummer und Michael Schmidt (ed.): Proceedings of the 6th International Conference on Additive Technologies, Ljubljana: 2016
• Walter B., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
  Nonlinear viscoelastic behavior or measuring artifact? On the wall slip of magnetorheological (MR) elastomers
  17th International Congress on Rheology (Kyoto, August 8, 2016 - August 13, 2016)
• Wang J., Steinmann P.:
  On the modeling of equilibrium twin interfaces in a single-crystalline magnetic shape-memory alloy sample—III: Magneto-mechanical behaviors
  In: Continuum Mechanics and Thermodynamics 28 (2016), p. 885-913
  ISSN: 0935-1175
  DOI: 10.1007/s00161-015-0452-3
• Wang J., Steinmann P.:
  On the modeling of equilibrium twin interfaces in a single-crystalline magnetic shape memory alloy sample. II: numerical algorithm
  In: Continuum Mechanics and Thermodynamics 28 (2016), p. 669-698
  ISSN: 0935-1175
  DOI: 10.1007/s00161-014-0403-4
• Weickenmeier J., de Rooij R., Budday S., Steinmann P., Ovaert T., Kuhl E.:
  Brain stiffness increases with myelin content
  In: Acta Biomaterialia (2016), p. 265–272
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2016.07.040
• Wilhelm P., Steinmann P., Rudolph J.:
  Effects of Boiling Water Reactor Medium on the Fatigue Life of Austenitic Stainless Steels
  In: Journal of Pressure Vessel Technology-Transactions of the Asme 138 (2016), p. 031406-1 - 031406-6
  ISSN: 0094-9930
  DOI: 10.1115/1.4032651
• Wilhelm P., Steinmann P., Rudolph J.:
  The Effect of Heat Treatments at Different Plastic States on the Isotropic Hardening Behavior of Austenitic Stainless Steel
  Annual Meeting on Nuclear Technology (Hamburg, May 10, 2016 - May 12, 2016)
  In: Compacts of the 47th AMNT 2016
• Zabihyan R., Mergheim J., Javili A., Steinmann P.:
  Computational Homogenization in Magneto-Mechanical Composites
  In: Proceedings in Applied Mathematics and Mechanics 16 (2016), p. 501-502
  ISSN: 1617-7061
  DOI: 10.1002/pamm.201610239

2015

• Aurich JC., Zimmermann M., Schindler S., Steinmann P.:
  Effect of the cutting condition and the reinforcement phase on the thermal load of the workpiece when dry turning aluminum metal matrix composites
  In: International Journal of Advanced Manufacturing Technology - (2015), p. 1-18
  ISSN: 0268-3768
  DOI: 10.1007/s00170-015-7444-0
• Aurich JC., Zimmermann M., Steinmann P., Schindler S.:
  Fertigungsgenauigkeit beim Drehen steigern - Einfluss der Prozessparameter auf die Maßhaltigkeit bei der Trockenbearbeitung
  In: VDI-Z Integrierte Produktion 157 (2015), p. 42-45
  ISSN: 0341-7255
• Budday S., Nay R., de Rooij R., Steinmann P., Wyrobek T., Ovaert T., Kuhl E.:
  Mechanical properties of gray and white matter brain tissue by indentation
  In: Journal of the Mechanical Behavior of Biomedical Materials (2015), p. 318-330
  ISSN: 1751-6161
  DOI: 10.1016/j.jmbbm.2015.02.024
• Budday S., Steinmann P., Goriely A., Kuhl E.:
  Size and curvature regulate pattern selection in the mammalian brain
  In: Extreme Mechanics Letters 4 (2015), p. 193-198
  ISSN: 2352-4316
  DOI: 10.1016/j.eml.2015.07.004
• Budday S., Steinmann P., Kuhl E.:
  Physical biology of human brain development
  In: Frontiers in Cellular Neuroscience 9 (2015), p. 1-13
  ISSN: 1662-5102
  DOI: 10.3389/fncel.2015.00257
• Budday S., Steinmann P., Kuhl E.:
  Secondary instabilities modulate cortical complexity in the mammalian brain
  In: Philosophical Magazine 95 (2015), p. 3244–3256
  ISSN: 1478-6435
  DOI: 10.1080/14786435.2015.1024184
• Budday S., Steinmann P., Kuhl E., Andres S.:
  Primary and secondary instabilities in soft bilayered systems
  GAMM Jahrestagung (Lecce)
  In: PAMM, Weinheim: 2015
  DOI: 10.1002/pamm.201510131
• Chatzigeorgiou G., Javili A., Steinmann P.:
  Interface properties influence the effective dielectric constant of composites
  In: Philosophical Magazine 95 (2015), p. 3402-3412
  ISSN: 1478-6435
  DOI: 10.1080/14786435.2015.1051155
• Chatzigeorgiou G., Javili A., Steinmann P.:
  Surface magnetoelasticity theory
  In: Archive of Applied Mechanics 85 (2015), p. 1265-1288
  ISSN: 0939-1533
  DOI: 10.1007/s00419-014-0938-7
• Chatzigeorgiou G., Mokarram H., Meraghni F., Steinmann P.:
  Micromechanics modeling of magneto-sensitive polymeric materials during curing
  20th International Conference on Composite Materials, ICCM 2015 (Copenhagen, DNK, July 19, 2015 - July 24, 2015)
  In: ICCM International Conferences on Composite Materials 2015
• Davydov D., Young T., Steinmann P.:
  On the adaptive finite element analysis of the Kohn-Sham equations: Methods, algorithms, and implementation.
  In: International Journal for Numerical Methods in Engineering (2015), p. n/a--n/a
  ISSN: 0029-5981
  DOI: 10.1002/nme.5140
• Endres F., Steinmann P.:
  An atomistic scale analysis of ferroelectric nanodomain interfaces
  86th GAMM Annual Meeting (Lecce, Italy)
  In: GAMM (ed.): Proceedings in Applied Mathematics and Mechanics, Weiheim: 2015
  DOI: 10.1002/pamm.201510134
• Endres F., Steinmann P.:
  Molecular statics simulations of ferroelectric barium titanate in the rhombohedral phase
  In: GAMM-Mitteilungen 38 (2015), p. 132-146
  ISSN: 0936-7195
  DOI: 10.1002/gamm.201510007
  URL: http://onlinelibrary.wiley.com/doi/10.1002/gamm.201510007/abstract
• Endres F., Steinmann P.:
  Molecular statics simulations of head to head and tail to tail nanodomains of rhombohedral barium titanate
  In: Computational Materials Science 97 (2015), p. 20-25
  ISSN: 0927-0256
  DOI: 10.1016/j.commatsci.2014.10.001
• Fillep S., Mergheim J., Steinmann P.:
  Computational homogenization of one-dimensional textile structures
  7th International Conference on Textile Composites and Inflatable Structures, STRUCTURAL MEMBRANES 2015 (Barcelona, ESP, October 19, 2015 - October 21, 2015)
  In: Eugenio Onate, Bernd Kroplin, Kai-Uwe Bletzinger (ed.): Proceedings of the 7th International Conference on Textile Composites and Inflatable Structures, STRUCTURAL MEMBRANES 2015 2015
• Fillep S., Mergheim J., Steinmann P.:
  Computational homogenization of rope-like technical textiles
  In: Computational Mechanics 55 (2015), p. 577-590
  ISSN: 0178-7675
  DOI: 10.1007/s00466-015-1124-7
• Friederich J., Pfaller S., Steinmann P.:
  A web-based tool for the interactive visualization of stresses in an infinite plate with an elliptical hole under simple tension: www.ltm.fau.de/plate .
  In: Archive of Applied Mechanics (2015), p. 1-9
  ISSN: 0939-1533
  DOI: 10.1007/s00419-015-1049-9
• Javili A., Chatzigeorgiou G., McBride AT., Steinmann P., Linder C.:
  Computational homogenization of nano-materials accounting for size effects via surface elasticity
  In: GAMM-Mitteilungen 38 (2015), p. 285-312
  ISSN: 0936-7195
  DOI: 10.1002/gamm.201510016
• Klinge S., Steinmann P.:
  Inverse analysis for heterogeneous materials and its application to viscoelastic curing polymers
  In: Computational Mechanics 55 (2015), p. 603-615
  ISSN: 0178-7675
  DOI: 10.1007/s00466-015-1126-5
• Landkammer P., Loderer A., Krebs E., Söhngen B., Steinmann P., Hausotte T., Kersting P., Willner K., Biermann D.:
  Experimental verification of a benchmark forming simulation
  In: Key Engineering Materials 639 (2015), p. 251-258
  ISSN: 1013-9826
  DOI: 10.4028/www.scientific.net/KEM.639.251
• Landkammer P., Steinmann P.:
  A global damping factor for a non-invasive form finding algorithm
  86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Lecce, Italy)
  In: GAMM (ed.): Proc. Appl. Math. Mech., Weinheim: 2015
  DOI: 10.1002/pamm.201510154
• Landkammer P., Steinmann P.:
  Application of a non-invasive form-finding algorithm to the ring compression test with varying friction coefficients
  In: Key Engineering Materials 651 (2015), p. 1381-1386
  ISSN: 1013-9826
  DOI: 10.4028/www.scientific.net/KEM.651-653.1381
• Landkammer P., Söhngen B., Loderer A., Krebs E., Steinmann P., Willner K., Hausotte T., Wiederkehr (geb. Kersting) P., Biermann D.:
  Experimentelle Verifizierung eines Benchmark-Umformprozesses
  In: Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, Aachen: 2015
• Loderer A., Hausotte T., Steinmann P., Merklein M., Landkammer P., Hildenbrand P., Schneider T.:
  Development of a feature adapted measurement evaluation strategy
  MacroScale 2014 - Recent developments in traceable dimensional measurements (Wien, October 28, 2014 - October 30, 2014)
  DOI: 10.7795/810.20150325P
• MHBM S., Bustamante RA., Mokarram H., Steinmann P.:
  A novel spectral formulation for transversely isotropic magneto-elasticity
  In: Mathematics and Mechanics of Solids - (2015), p. -
  ISSN: 1081-2865
• Mehnert M., Fillep S., Mergheim J., Steinmann P.:
  Computational Homogenization of Micromechanically Resolved Textile Materials
• Mokarram H., Chatzigeorgiou G., Meraghni F., Steinmann P.:
  A multi-scale approach to model the curing process in magneto-sensitive polymeric materials
  In: International Journal of Solids and Structures 69-70 (2015), p. 34-44
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2015.06.011
• Mokarram H., Saxena P., Steinmann P.:
  Modelling the curing process in magneto-sensitive polymers: Rate-dependence and shrinkage
  In: International Journal of Non-Linear Mechanics 74 (2015), p. 108-121
  ISSN: 0020-7462
  DOI: 10.1016/j.ijnonlinmec.2015.04.008
• Mokarram H., Saxena P., Steinmann P.:
  Modelling the mechanical aspects of the curing process of magneto-sensitive elastomeric materials
  In: International Journal of Solids and Structures 58 (2015), p. 257-269
  ISSN: 0020-7683
  DOI: 10.1016/j.ijsolstr.2015.01.010
• Mokarram H., Steinmann P.:
  Continuum physics of materials with time dependent properties: Reviewing the case of polymer curing
  In: Advances in Applied Mechanics - (2015), p. -
  ISSN: 0065-2156
• Mokarram H., Steinmann P.:
  Towards modelling the curing process in particle-filled electro-active polymers
  86th GAMM Annual Meeting (Lecce, Italy)
  In: GAMM (ed.): PAMM, Lecce, Italy: 2015
  DOI: 10.1002/pamm.201510141
• Pfaller S., Steinmann P.:
  The Capriccio Method: An Arlequin‐Based Approach to Couple Molecular Dynamics and Finite Element Simulations of Polymers
  GDR Polynano 3661 - Scientific Workshop on multiscale modeling, experimental characterization and simulations of nanocomposites (Université Paris‐Est Marne‐la‐Vallée, June 15, 2015 - June 15, 2015)
• Riedlbauer DR., Steinmann P., Mergheim J.:
  Thermomechanical simulation of the selective laser melting process for PA12 including volumetric shrinkage
  The 30th International Conference of the Polymer Processing Society (Cleveland)
  In: PROCEEDINGS OF PPS-30, Cleveland, USA: 2015
  DOI: 10.1063/1.4918512
• Riehl S., Steinmann P.:
  A staggered approach to shape and topology optimization using the traction method and an evolutionary-type advancing front algorithm
  In: Computer Methods in Applied Mechanics and Engineering 287 (2015), p. 1-30
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2015.01.007
• Riehl S., Steinmann P.:
  A staggered approach to structural shape and topology optimization
  86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Lecce)
  In: Proc. Appl. Math. Mech., Weinheim: 2015
  DOI: 10.1002/pamm.201510277
• Riehl S., Steinmann P.:
  Structural optimization of shape and topology using an evolutionary-type advancing front algorithm
  3rd Eccomas Young Investigators Conference (Aachen, Germany)
  In: Conference Proceedings of the YIC GACM 2015 2015
• Saxena P., Pelteret JP., Steinmann P.:
  Modelling of iron-filled magneto-active polymers with a dispersed chain-like microstructure
  In: European Journal of Mechanics A-Solids 50 (2015), p. 132-151
  ISSN: 0997-7538
  DOI: 10.1016/j.euromechsol.2014.10.005
• Schindler S., Zimmermann M., Aurich JC., Steinmann P.:
  Identification of thermal effects on the diameter deviation of inhomogeneous aluminum metal matrix composite workpieces when dry turning
  In: Production Engineering 9 (2015), p. 473-485
  ISSN: 0944-6524
  DOI: 10.1007/s11740-015-0629-4
• Schmidt U., Mergheim J., Steinmann P.:
  Identification of elastoplastic microscopic material parameters within a homogenization scheme
  In: International Journal for Numerical Methods in Engineering 104 (2015), p. 391–407
  ISSN: 0029-5981
• Schmidt U., Steinmann P., Mergheim J.:
  Two-scale elastic parameter identification from noisy macroscopic data
  In: Archive of Applied Mechanics (2015)
  ISSN: 0939-1533
• Schmitt O., Steinmann P.:
  On curvature control in node-based shape optimization
  GAMM 2015 (Lecce, Italy, March 23, 2015 - March 27, 2015)
  In: PAMM, Lecce, Italy: 2015
  DOI: 10.1002/pamm.201510279
• Schrade D., Mueller R., Gross D., Steinmann P.:
  Phase field simulations of the poling behavior of BaTiO3 nano-scale thin films with SrRuO3 and Au electrodes
  In: European Journal of Mechanics A-Solids 49 (2015), p. 455-466
  ISSN: 0997-7538
  DOI: 10.1016/j.euromechsol.2014.08.007
• Steinmann P.:
  Geometrical Foundations of Continuum Mechanics
  Berlin Heidelberg: Springer, 2015
  (Lecture Notes in Applied Mathematics and Mechanics, Vol.2)
  ISBN: 978-3-662-46459-5
  DOI: 10.1007/978-3-662-46460-1
• Steinmann P., Endres F.:
  On molecular statics simulations of ferroelectric functional materials
  86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Lecce, Italy)
  In: GAMM (ed.): Proceedings in Applied Mathematics and Mechanics, Weinheim: 2015
  DOI: 10.1002/pamm.201510005
• Walter B., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
  Nonlinear viscoelastic behavior or measuring artifact? On the wall slip of magneto-sensitive elastomers
  10th Annual European Rheology Conference (Nantes, April 14, 2015 - April 17, 2015)
• Walter B., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
  On the wall slip of magnetorheological elastomers in parallel-plate rotational rheometry
  7th ECCOMAS Thematic Conference on Smart Structures and Materials (Ponta Delgada / Azores)
• Walter B., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
  Wall slip of magnetorheological elastomers in parallel-plate rotational rheometry
  7. TA Anwendertreffen Rheologie - Erlangen (Erlangen)
• Wang J., Steinmann P., Rudolph J., Willuweit A.:
  Simulation of creep and cyclic viscoplastic strains in high-Cr steel components based on a modified becker-hackenberg model
  In: International Journal of Pressure Vessels and Piping 128 (2015), p. 36-47
  ISSN: 0308-0161
  DOI: 10.1016/j.ijpvp.2015.02.003
• Wilhelm P., Steinmann P., Rudolph J.:
  Effects of Pressurized Water Reactor Medium on the Fatigue Life of Austenitic Stainless Steels
  In: Journal of Pressure Vessel Technology-Transactions of the Asme 137 (2015), p. 061404-1 - 061404-7
  ISSN: 0094-9930
  DOI: 10.1115/1.4029832
• Wilhelm P., Steinmann P., Rudolph J.:
  Fatigue Approach for Addressing Environmental Effects in Fatigue Usage Calculation
  In: Atw-International Journal For Nuclear Power 60 (2015), p. 245 - 250
  ISSN: 1431-5254
• Wilhelm P., Steinmann P., Rudolph J.:
  Fatigue Strain-Life Behavior of Austenitic Stainless Steels in Pressurized Water Reactor Environments
  Pressure Vessels and Piping Conference (Boston, July 19, 2015 - July 23, 2015)
  In: American Society of Mechanical Engineers (ed.): Proceedings of the ASME 2015 Pressure Vessels & Piping Conference 2015
• Wilhelm P., Steinmann P., Rudolph J.:
  Statistical Analysis of Fatigue Data for Austenitic Stainless Steels in Water Environments
  Annual Meeting on Nuclear Technology (Berlin, May 5, 2015 - May 7, 2015)
  In: Compacts of the 46th AMNT 2015
• Wilhelm P., Steinmann P., Rudolph J.:
  Statistical Models for Estimating Fatigue Lives of Austenitic Stainless Steels in Light Water Reactor Environments
  Structural Mechanics in Reactor Technology (Manchester, August 10, 2015 - August 14, 2015)
  In: Compacts of the 23th SMiRT Conference 2015

2014

• Budday S., Steinmann P., Kuhl E.:
  A mechanical approach to explain cortical folding phenomena in healthy and diseased brains
  GAMM 2014 (Erlangen, Germany, March 10, 2014 - March 14, 2014)
  In: PAMM, Erlangen, Germany: 2014
  DOI: 10.1002/pamm.201410038
• Budday S., Steinmann P., Kuhl E.:
  The role of mechanics during brain development
  In: Journal of the Mechanics and Physics of Solids 72 (2014), p. 75-92
  ISSN: 0022-5096
  DOI: 10.1016/j.jmps.2014.07.010
• Chatzigeorgiou G., Javili A., Steinmann P.:
  Surface electrostatics - Theory and computations
  In: Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences 470 (2014), p. -
  ISSN: 1364-5021
  DOI: 10.1098/rspa.2013.0628
• Davydov D., Pelteret JP., Steinmann P.:
  Comparison of several staggered atomistic-to-continuum concurrent coupling strategies
  In: Computer Methods in Applied Mechanics and Engineering 277 (2014), p. 260-280
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2014.04.013
• Davydov D., Steinmann P.:
  Reviewing the roots of continuum formulations in molecular systems. Part III: Stresses, Couple Stresses, Heat Fluxes
  In: Mathematics and Mechanics of Solids (2014), p. -
  ISSN: 1081-2865
  DOI: 10.1177/1081286513516480
• Davydov D., Voyiatzis E., Chatzigeorgiou G., Liu S., Steinmann P., Böhm M., Müller-Plathe F.:
  Size effects in a silica-polystyrene nanocomposite: Molecular dynamics and surface-enhanced continuum approaches
  In: Soft Materials 12 (2014), p. S142-S151
  ISSN: 1539-4468
  DOI: 10.1080/1539445X.2014.959597
• Endres F., Steinmann P.:
  An extended molecular statics algorithm simulating the electromechanical continuum response of ferroelectric materials
  In: Computational Mechanics 54 (2014), p. 1515-1527
  ISSN: 0178-7675
  DOI: 10.1007/s00466-014-1072-7
• Endres F., Steinmann P.:
  Molecular static simulations of ferroelectric material hysteresis behaviour
  GAMM 2014 (Erlangen, Germany, March 10, 2014 - March 14, 2014)
  In: PAMM, Erlangen, Germany: 2014
  DOI: 10.1002/pamm.201410192
• Endres F., Steinmann P.:
  On an atomistic scale finite element method for the simulation of ferroelectric functional materials
  2nd Seminar on the mechanics of multifunctional materials (Bad Honnef, Germany)
  In: Proceedings on 2nd SMMM Conference on Smart Materials 2014
• Fillep S., Mergheim J., Steinmann P.:
  Microscale modeling and homogenization of rope-like textiles
  85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Erlangen)
  In: Proc. Appl. Math. Mech., Weinheim: 2014
  DOI: 10.1002/pamm.201410262
• Germain S., Landkammer P., Steinmann P.:
  A comparison between a recursive method based on an inverse mechanical formulation and shape optimization for solving inverse form finding problems in isotropic elastoplasticity
  GAMM 2014 (Erlangen, March 10, 2014 - March 14, 2014)
  In: PAMM 2014, Erlangen, Germany: 2014
  DOI: 10.1002/pamm.201410199
• Germain S., Landkammer P., Steinmann P.:
  On a recursive formulation for solving inverse form finding problems in isotropic elastoplasticity
  In: Advanced Modeling and Simulation in Engineering Sciences 1 (2014), p. -
  ISSN: 2213-7467
  DOI: 10.1186/2213-7467-1-10
• Javili A., Käßmair S., Steinmann P.:
  General imperfect interfaces
  In: Computer Methods in Applied Mechanics and Engineering 275 (2014), p. 76-97
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2014.02.022
• Javili A., Mcbride A., Steinmann P., Reddy BD.:
  A unified computational framework for bulk and surface elasticity theory: A curvilinear-coordinate-based finite element methodology
  In: Computational Mechanics 54 (2014), p. 745-762
  ISSN: 0178-7675
  DOI: 10.1007/s00466-014-1030-4
• Javili A., Steinmann P., Kuhl E.:
  A novel strategy to identify the critical conditions for growth-induced instabilities
  In: Journal of the Mechanical Behavior of Biomedical Materials 29 (2014), p. 20-32
  ISSN: 1751-6161
  DOI: 10.1016/j.jmbbm.2013.08.017
• Keip MA., Steinmann P., Schroeder J.:
  Two-scale computational homogenization of electro-elasticity at finite strains
  In: Computer Methods in Applied Mechanics and Engineering 278 (2014), p. 62-79
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2014.04.020
• Käßmair S., Javili A., Steinmann P.:
  Thermomechanics of solids with general imperfect coherent interfaces
  In: Archive of Applied Mechanics 84 (2014), p. 1409-1426
  ISSN: 0939-1533
  DOI: 10.1007/s00419-014-0870-x
• Landkammer P., Germain S., Steinmann P.:
  On inverse form finding for orthotropic plasticity
  In: Computer Assisted Mechanics and Engineering Sciences 20 (2014), p. 337-348
  ISSN: 1232-308X
• Landkammer P., Germain S., Steinmann P.:
  Optimum blank design by using the inverse FEM in orthotropic elastoplasticity
  GAMM 2014 (Erlangen, Germany, March 10, 2014 - March 14, 2014)
  In: PAMM 2014
  DOI: 10.1002/pamm.201410164
• Landkammer P., Steinmann P.:
  A fast approach to shape optimization by using the inverse FEM
  In: Key Engineering Materials 611 (2014), p. 1404-1412
  ISSN: 1013-9826
  DOI: 10.4028/www.scientific.net/KEM.611-612.1404
• Leugering G., Friederich J., Steinmann P.:
  Adaptive finite elements based on sensitivities for topological mesh changes
  In: Control and Cybernetics 43 (2014), p. 279-306
  ISSN: 0324-8569
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85018838294&origin=inward
• Mokarram H., Saxena P., Steinmann P.:
  Finite strain modelling for the curing process in magneto-viscoelasticity
  22nd ACME (University of Exeter, UK)
  In: Proceedings on 22nd ACME Conference on Computational Mechanics 2014
• Mokarram H., Steinmann P.:
  Degree of cure-dependent modelling for polymer curing processes at small-strain. Part I: Consistent reformulation
  In: Computational Mechanics 53 (2014), p. 777-87
  ISSN: 0178-7675
  DOI: 10.1007/s00466-013-0929-5
  URL: http://link.springer.com/article/10.1007%2Fs00466-013-0929-5
• Mokarram H., Vu DK., Steinmann P.:
  A comprehensive characterization of the electro-mechanically coupled properties of VHB 4910 polymer
  In: Archive of Applied Mechanics 85 (2014), p. 523 - 537
  ISSN: 0939-1533
  DOI: 10.1007/s00419-014-0928-9
• Mokarram H., Vu DK., Steinmann P.:
  On characterization of the electro-mechanically coupled properties of VHB polymer
  SMMM2 (Bad Honnef, Germany)
  In: Proceedings on 2nd SMMM Conference on Smart Materials 2014
• Pelteret JP., Saxena P., Walter B., Davydov D., Steinmann P.:
  Towards a computational model of magneto-sensitive polymers
  85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (Erlangen, March 10, 2014 - March 14, 2014)
• Pfaller S., Possart G., Steinmann P.:
  Molecular dynamics and finite elements: an approach to couple different worlds
  GAMM 2014 (Erlangen, Germany, March 10, 2014 - March 14, 2014)
  In: PAMM, Erlangen, Germany: 2014
  DOI: 10.1002/pamm.201410272
• Ravnik J., Hribersek M., Vogel FA., Steinmann P.:
  Numerical simulation of particles movement in cellular flows under the influence of magnetic forces
  In: International Journal of Simulation Modelling 13 (2014), p. 300-311
  ISSN: 1726-4529
  DOI: 10.2507/IJSIMM13(3)4.268
• Riedlbauer DR., Drexler M., Drummer D., Steinmann P., Mergheim J.:
  Modelling, simulation and experimental validation of heat transfer in selective laser melting of the polymeric material PA12
  In: Computational Materials Science 93 (2014), p. 239-248
  ISSN: 0927-0256
  DOI: 10.1016/j.commatsci.2014.06.046
• Riedlbauer DR., Mergheim J., Steinmann P.:
  Simulation of the temperature distribution in the selective beam melting process for polymer material
  29th International Conference of the Polymer Processing Society (Nuremberg, Germany, July 15, 2013 - July 19, 2013)
  In: 29th International Conference of the Polymer Processing Society, USA: 2014
  DOI: 10.1063/1.4873876
• Riedlbauer DR., Mergheim J., Steinmann P.:
  Thermomechanical Simulation of the Electron Beam Melting Process for TiAl6V4
  GAMM 2014 (Erlangen, Germany, March 10, 2014 - March 14, 2014)
  In: Proceedings in Applied Mathematics and Mechanics, Erlangen, Germany: 2014
  DOI: 10.1002/pamm.201410219
• Riedlbauer DR., Steinmann P., Mergheim J.:
  Simulation von Temperaturfeldern und mechanischen Materialverhalten in additiven Fertigungsprozessen
  3. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nuremberg, Germany, April 12, 2014)
  In: 3. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung 2014
• Riedlbauer DR., Steinmann P., Mergheim J.:
  Thermomechanical finite element simulations of selective electron beam melting processes: Performance considerations
  In: Computational Mechanics 54 (2014), p. 109-122
  ISSN: 0178-7675
  DOI: 10.1007/s00466-014-1026-0
• Riehl S., Friederich J., Scherer M., Meske R., Steinmann P.:
  On the discrete variant of the traction method in parameter-free shape optimization
  In: Computer Methods in Applied Mechanics and Engineering 278 (2014), p. 119-144
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2014.05.009
• Riehl S., Friederich J., Steinmann P.:
  On regularization in parameter-free shape optimization
  85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Erlangen, March 10, 2014 - March 14, 2014)
  In: Proc. Appl. Math. Mech., Weinheim: 2014
  DOI: 10.1002/pamm.201410375
• Riehl S., Steinmann P.:
  An integrated approach to shape optimization and mesh adaptivity based on material residual forces
  In: Computer Methods in Applied Mechanics and Engineering 278 (2014), p. 640-663
  ISSN: 0045-7825
  DOI: 10.1016/j.cma.2014.06.010
• Saxena P., Mokarram H., Steinmann P.:
  Nonlinear magneto-viscoelasticity of transversally isotropic magneto-active polymers
  In: Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences 470 (2014), p. -
  ISSN: 1364-5021
  DOI: 10.1098/rspa.2014.0082
  URL: http://rspa.royalsocietypublishing.org/content/470/2166/20140082.short?rss=1
• Saxena P., Mokarram H., Walter B., Pelteret JP., Steinmann P.:
  Rate dependent deformations in magneto-rheological elastomers: Modelling and experiments
  IUTAM Symposium on Thermomechanical-Electromagnetic coupling in solids: Microstructral and Stability Aspects (Paris, June 16, 2014 - June 18, 2014)
• Saxena P., Vu DK., Steinmann P.:
  On rate-dependent dissipation effects in electro-elasticity
  In: International Journal of Non-Linear Mechanics 62 (2014), p. 1-11
  ISSN: 0020-7462
  DOI: 10.1016/j.ijnonlinmec.2014.02.002
• Saxena P., Walter B., Kaschta J., Fey T., Steinmann P., Schubert DW.:
  Thermodynamically Consistent Model to Predict the Magneto-Rheological Behavior of Magneto-Sensitive Elastomers
  9th Annual European Rheology Conference (Karlsruhe, April 8, 2014 - April 11, 2014)
• Schindler S., Zimmermann M., Aurich JC., Steinmann P.:
  A two-scale simulation method accounting for thermal effects during turning
  GAMM 2014 (Erlangen, Germany, March 10, 2014 - March 14, 2014)
  In: PAMM 2014, Erlangen, Germany: 2014
  DOI: 10.1002/pamm.201410106
• Schindler S., Zimmermann M., Aurich JC., Steinmann P.:
  Finite element model to calculate the thermal expansion of the tool and the workpiece in dry turning
  6th CIRP Conference on High Performance Cutting (6th CIRP HPC) (Berkeley, USA)
  In: Proceedia CIRP 2014
  DOI: 10.1016/j.procir.2014.03.087
• Schindler S., Zimmermann M., Aurich JC., Steinmann P.:
  Thermo-elastic deformations of the workpiece when dry turning aluminum alloys - A finite element model to predict thermal effects in the workpiece
  In: CIRP Journal of Manufacturing Science and Technology 7 (2014), p. 233-245
  ISSN: 1755-5817
  DOI: 10.1016/j.cirpj.2014.04.006
• Schmitt O., Friederich J., Steinmann P.:
  Manufacturing constraints in parameter-free sensitivity-based shape optimization
  1st International Conference on Engineering and Applied Sciences Optimization (OPT-i) (Kos Island, Greece, June 4, 2014 - June 6, 2014)
  In: Proceedings of 1st International Conference on Engineering and Applied Sciences Optimization 2014
• Schmitt O., Friederich J., Steinmann P.:
  Manufacturing constraints in parameter-free shape optimization
  GAMM 2014 (Erlangen, Germany, March 10, 2014 - March 14, 2014)
  In: PAMM, Erlangen, Germany: 2014
  DOI: 10.1002/pamm.201410376
• Vogel FA., Göktepe S., Steinmann P., Kuhl E.:
  Modeling and simulation of viscous electro-active polymers
  In: European Journal of Mechanics A-Solids 48 (2014), p. 112-128
  ISSN: 0997-7538
  DOI: 10.1016/j.euromechsol.2014.02.001
• Vogel FA., Pelteret JP., Käßmair S., Steinmann P.:
  Magnetic force and torque on particles subject to a magnetic field
  In: European Journal of Mechanics A-Solids 48 (2014), p. 23-37
  ISSN: 0997-7538
  DOI: 10.1016/j.euromechsol.2014.03.007
• Walter B., Saxena P., Kaschta J., Schubert DW., Steinmann P.:
  Magneto-Sensitive Elastomers: An Experimental Point of View
  85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (Erlangen)
• Walter B., Saxena P., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
  On the Preparation, Characterisation, Modelling and Simulation of Magneto-Sensitive Elastomers
  Second Seminar on the Mechanics of Multifunctional Materials (Bad Honnef, May 5, 2014 - May 9, 2014)
  In: Schröder J., Lupascu D.C., Keip M.-A., Brands D. (ed.): Proceedings of the Second Seminar on the Mechanics of Multifunctional Materials 2014
• Walter B., Saxena P., Pelteret JP., Kaschta J., Schubert DW., Steinmann P.:
  On the Preparation, Characterization, Modeling and Simulation of Magneto-Sensitive Elastomers
  14th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (Granada, July 7, 2014 - July 11, 2014)
• Wang J., Steinmann P., Rudolph J., Willuweit A.:
  Simulation of the creep and fatigue damages in high-Cr steel components based on a modified becker-hackenberg model
  ASME 2014 Pressure Vessels and Piping Conference, PVP 2014 (Anaheim, CA, USA, July 20, 2014 - July 24, 2014)
  In: American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 2014
  DOI: 10.1115/PVP2014-28253
• Wilhelm P., Steinmann P., Rudolph J.:
  Compilation of Fatigue Data for Austenitic Stainless Steels
  Annual Meeting on Nuclear Technology (Frankfurt am Main, May 6, 2014 - May 8, 2014)
  In: Compacts of the 45th AMNT 2014
• Wilhelm P., Steinmann P., Rudolph J.:
  Discussion of Fatigue Data for Austenitic Stainless Steels
  Pressure Vessels and Piping Conference (Anaheim, July 20, 2014 - July 24, 2014)
  In: American Society of Mechanical Engineers (ed.): Proceedings of the ASME 2014 Pressure Vessels & Piping Conference 2014
• Wilhelm P., Steinmann P., Rudolph J.:
  Einbindung der neuen Regelwerksanforderungen in lokale Fatigue-Monitoring Lösungen
  Workshop of Materials Testing Institute University of Stuttgart: „Ermüdungsverhalten von Bauteilen in Leichtwasserreaktoren unter Berücksichtigung des Kühlmediums“ (Stuttgart, September 10, 2014 - September 10, 2014)
  In: Materialprüfungsanstalt der Universität Stuttgart (ed.): MPA Workshop 2014: Ermüdungsverhalten 2014
• Wilhelm P., Steinmann P., Rudolph J.:
  Statistical Model of Water Environment Effects on the Fatigue Behavior of Austenitic Stainless Steels
  Materials Testing Institute University of Stuttgart - Seminar (Stuttgart, October 6, 2014 - October 7, 2014)
  In: Materialprüfungsanstalt der Universität Stuttgart (ed.): Manuscripts of the 40th MPA Seminar 2014
• Zadravec M., Hribersek M., Steinmann P., Ravnik J.:
  High gradient magnetic particle separation in a channel with bifurcations
  In: Engineering Analysis With Boundary Elements 49 (2014), p. 22-30
  ISSN: 0955-7997
  DOI: 10.1016/j.enganabound.2014.04.012
• Zimmermann M., Schindler S., Steinmann P., Aurich JC.:
  Drehen metallischer Verbundwerkstoffe
  In: wt Werkstattstechnik - Online 104 (2014), p. 33-39
  ISSN: 1436-4980
• Zimmermann M., Schindler S., Steinmann P., Aurich JC.:
  Effect of the cutting condition and the reinforcement of the MMC on the machining accuracy Drehen metallischer Verbundwerkstoffe: Einfluss von Prozessparametern und Verstärkungsphase auf die Fertigungsgenauigkeit
  In: wt Werkstattstechnik - Online 104 (2014), p. 33-39
  ISSN: 1436-4980